Aluminium loading ramps, max. load 200 to 1200 kg

Loading ramps, perforated walking surface, max. load 275 kg, ramp width 200 mm.

Loading ramps, perforated walking surface, max. load 200 kg, ramp width 200 mm.

Bridge plates with hinged platform and side hand grips, bridging length 1235 mm, max. load 3000 kg. Platform with anti-slip crosswise ribbing. Rubber anti-slip device at bottom. Other side with stop angle to prevent slippage.

Low profile lift table, max. load 1000 kg, LxW 1350 x 800 mm, 230 V, with hand operated control unit. The newly developed, patented lifting mechanism enables an extremely low height...

...box and is connected to the table via quick connectors. All lift tables are fitted with safety strips and electrically controlled safety valves, and comply with the EN-1570...

...box and is connected to the table via quick connectors. All lift tables are fitted with safety strips and electrically controlled safety valves, and comply with the EN-1570 standard...

...box and is connected to the table via quick connectors. All lift tables are fitted with safety strips and electrically controlled safety valves, and comply with the EN-1570 standard...

...box and is connected to the table via quick connectors. All lift tables are fitted with safety strips and electrically controlled safety valves, and comply with the EN-1570...

...standard and VDE requirements. Platform and frame powder coated signal blue RAL 5005, scissor mechanism signal orange RAL 2010. Hand or foot operated control unit included as standard, with 3 m cable, emergency off switch, control voltage 24 V.

Low profile platform truck, max. load 500 kg, forks, lifting range 80 - 900 mm. Chrome plated push handle. Optionally with forks or platform. Foot operated hydraulics....

...and is connected to the table via quick connectors. All lift tables are fitted with safety strips and electrically controlled safety valves, and comply with the EN-1570 standard...

Compact lift table, max. load 1500 kg, platform LxW 1500 x 1000 mm, overall height 210 mm. Compact lift tables can be used either free standing or built-in, so that the platform...

...quality powder coating, frame and platform in signal blue RAL 5005, scissor mechanism in signal orange RAL 2010. Controlled via hand switch with 3 m cable, emergency off switch. Operating voltage 400 V. Control voltage 24 V. 230 V model on request.

Bridge plates with angled stop limit, bridging depth 750 mm, max. load 1200 kg.

...180° or 360° and optimally positioned. Pallets, for instance, can be effortlessly loaded and unloaded by bringing goods to the recipient, not the other way round. Secure locking at 180° and 360°. The E-platform requires a stacker for loading.

...mesh pallets and containers. The device can be angled towards the operator up to 25°. This ensures easy access to the furthest corner of the mesh pallet. By maintaining a straight...

...a variety of applications. All-round foot clearance without a base frame for the best ergonomics. Non-electric foot contact rail, completely hydraulic operation. Flat design...

...transparent material with rounded edges, prevents injuries. 2 red strips are supplied to create a visual border. Design features All strips are attached individually making them easy to replace. Zinc plated steel parts. Supplied as a kit, easy to assemble.

...material with rounded edges, prevents injuries. 2 red strips are supplied to create a visual border. Design features All strips are attached individually making them easy to replace. Zinc plated steel parts. Supplied as a kit, easy to assemble.

Strip curtain to divide halls, price / m², overlapping 150 mm = 100%, attachment method: rotating, direct, door-opening height up to 2 m. Plastic strips made from transparent...

Strip curtain to divide halls, price / m², overlapping 150 mm = 100%, attachment method: rotating, in front of the lintel, door-opening height up to 4 m. Plastic strips made...

...with rounded edges, prevents injuries. 2 red strips are supplied to create a visual border. Design features All strips are attached individually making them easy to replace. Zinc plated steel parts. Supplied as a kit, easy to assemble.

...from transparent material with rounded edges, prevents injuries. 2 red strips are supplied to create a visual border. Design features All strips are attached individually making them easy to replace. Zinc plated steel parts. Supplied as a kit, easy to assemble.

...after each passage. Reinforcement and fittings 2 mm thick steel box profile. Closing spring receiver integrated into box profile, constitutes one component together with upper bearing.

Swivel gates for indoor use, width up to 2500 mm, crystal clear, height 2000 mm. The double sided spring lock permits an opening angle of 2 x 90°. Swivel doors close automatically...

...after each passage. Reinforcement and fittings 2 mm thick steel box profile. Closing spring receiver integrated into box profile, constitutes one component together with upper bearing.

...Not suitable for continuous use at negative temperatures. Available max. width 2000 mm, available max. length 5000 mm.

Ramp element, max. load 600 kg, LxW 645 x 750 mm.

Assembly lift table, max. load 1000 kg, platform LxW 1250 x 800 mm, 400 V. Cylinder with magnet valve. All round safety contact rail on the platform. Pump with overload valve....

...with foot pump (bio oil). 2 swivel castors with double stops, Ø 125 mm, polyurethane. 2 fixed wheels, Ø 200 mm, solid rubber tyres.

...with foot protection. Polyurethane tyres. Inspection supports, chrome plated bar. Powder coated in gentian blue RAL 5010 and traffic orange RAL 2009.

...push handle. Zinc plated platform. Frame powder coated in white aluminium RAL 9006. Scissor mechanism and push handle powder coated in light blue RAL 5012. 2 swivel castors with...

Scissor lift platform truck, max. load 1000 kg, lifting range 320 - 1200 mm. Zinc plated platform. Scissor lift with hydraulic lifting cylinder and fold-away pedal (bio oil)....

Double scissor lifting platform truck, max. load 500 kg, lifting range 470 - 1400 mm, solid rubber tyres. Zinc plated platform. Hydraulic lifting cylinder (bio oil), lifting...

...and progressive lowering with pedals. Folding push handle. 2 steering wheels with double stops, 2 fixed castors. Powder coating Scissor lift mechanism and handle light blue RAL 5012. Base frame white aluminium RAL 9006.

Double scissor lifting platform truck, max. load 1000 kg, lifting range 470 - 1400 mm, polyurethane tyres. Zinc plated platform. Hydraulic lifting cylinder (bio oil), lifting...

Double scissor lifting platform truck with bellows, max. load 1000 kg, lifting range 470 - 1400 mm, polyurethane wheels. Zinc plated platform. Frame powder coated in white...

Assembly lift table, max. load 500 kg, with foot pump, platform LxW 1250 x 1000 mm. Height adjustment via hydraulic foot pump (bio oil) with 3 m long hose. Floor anchoring not necessary. Unloaded table can be tilted on one side and moved. No pit installation.

Assembly lift table, max. load 2000 kg, platform LxW 1250 x 800 mm, 400 V. Cylinder with magnet valve. All round safety contact rail on the platform. Pump with overload...

Assembly lift table, max. load 2000 kg, platform LxW 1250 x 1000 mm, 400 V. Cylinder with magnet valve. All round safety contact rail on the platform. Pump with overload valve....

...Operated via hand button (safety switch) on a 3 m control cable. Inspection supports. Compact hydraulics (bio oil).

...Operated via hand button (safety switch) on a 3 m control cable. Inspection supports. Compact hydraulics (bio oil).

...via hand button (safety switch) on a 3 m control cable. Inspection supports. Compact hydraulics (bio oil).

Scissor lift accessory, roller conveyor, rigid, overall height 110 mm, LxW 1200 x 750 mm. For platform length x width 1190 x 740 mm. Transported goods are secured at ends of conveyor with folding end stops. Sealed ball bearings. Optionally rigid or rotating.

Scissor lift accessory, roller conveyor, rotating, overall height 152 mm, LxW 1200 x 750 mm. For platform length x width 1190 x 740 mm. Transported goods are secured at ends of conveyor with folding end stops. Sealed ball bearings. Optionally rigid or rotating.

Scissor lift accessory, roller conveyor, rigid, overall height 110 mm, LxW 760 x 760 mm. Goods are secured at both ends of conveyor with folding end-stops. Sealed ball bearings.

Scissor lift accessory, roller conveyor, rotating, overall height 152 mm, LxW 760 x 760 mm. Goods are secured at both ends of conveyor with folding end-stops. Sealed ball bearings.

...of durable polyester material with polyurethane coating on both sides, temperature resistant up to +120 °C.

...is level with the ground. The table is smoothly and quickly raised to the desired height at the touch of a button. The electro hydraulic motor is integrated into the device....

Bridge plates with angled stop limit, bridging depth 1800 mm, max. load 1200 kg.