Barrier post made of rectangular steel, tilting

Barrier chains, made of polyamide, light-duty design, per m, minimum purchase 50 m, black/yellow. Lasting, weather resistant colour polyamide. For especially harsh conditions:...

...hot dip galvanised steel with highly weather resistant plastic coating. Especially suitable for ramp barriers etc. End and connecting links made of plastic coated steel for a...

Waste collector made of sheet steel with protective hood, capacity 37 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Waste collector made of sheet steel with protective hood, capacity 50 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Tubular steel posts, for sheet steel waste containers without ashtrays, 60 mm diameter, length 1200 mm.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, white. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, brown. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 9 seating and back support planks, without arm rests, bench length 2.0 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Security/safety mirror, triangular, made of acryl glass, HxW 310 x 380 mm. Concave triangular acrylic glass mirror. Vice mounting bracket with flexible neck. Effortless attachment...

Surcharge for lock for barrier with gas pressure spring, on main post, triangular lock. Lock on main post (1) Fireman's triangle lock corresponding to DIN 3223 (2) Cylinder...

...a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective...

...9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above ground 2050 mm. Or with lighting (florescent tube). We recommend ordering a text bar to cover the lighting.

...paint in grey white RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above...

...and silver anodised (E2/C0), with integrated ventilation and water drainage system. Glass pane made of 5 mm acrylic glass. Patented, concealed hinge system - prevents magnets...

...(E2/C0), with integrated ventilation and water drainage system. Glass pane made of 5 mm acrylic glass. Patented, concealed hinge system - prevents magnets from falling between...

...(E2/C0), with integrated ventilation and water drainage system. Glass pane made of 5 mm acrylic glass. Patented, concealed hinge system - prevents magnets from falling...

Bicycle rack, bars made of 18 mm steel tubing, single-sided wheel guide, hot-dip galvanised, 5 parking spaces. Universal wheel holders are wide at the front for easy entry,...

Bicycle rack, bars made of 18 mm steel tubing, single-sided wheel guide, hot-dip galvanised, 6 parking spaces. Universal wheel holders are wide at the front for easy entry, and...

Bicycle rack, bars made of 18 mm steel tubing, double sided wheel guide, hot-dip galvanised, 10 parking spaces. Universal wheel holders are wide at the front for easy entry,...

...narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy assembly of the wheel holders to the angled steel base frame using the supplied instructions.

Flag pole, two-piece, cylindrical, pole diameter 75/60 mm, height above ground 7 m, incl. aluminium base mounting. External hoisting mechanism. Non-stretching hoist rope and cover cap. Simple aluminium base mounting.

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 8 m, pole diameter 75 mm. Interior, low resonance hoisting mechanism....

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 8 m, pole diameter 100 mm. Interior, low resonance hoisting mechanism....

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 10 m, pole diameter 100 mm. Interior, low resonance hoisting mechanism....

Flag pole, one-piece, cylindrical, external raising device, height above ground 7 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

Flag pole, one-piece, cylindrical, external raising device, height above ground 8 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 7 m, pole diameter 75 mm. Internal, low resonance hoisting mechanism. Special hex socket...

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 8 m, pole diameter 100 mm. Internal, low resonance hoisting mechanism. Special hex socket...

Base mount for flag poles, with centering wedge, for pole diameter under 75 mm. Aluminium bushing with floor funnel and plastic centring wedge.

Base mount for flag poles, made of steel, with rubber ring clip as vibration damper, for pole diameter under 100 mm. Clamp ring made of cast steel with vibration reduction...

Base mount for flag poles, made of steel, with rubber ring clip as vibration damper, for pole diameter under 75 mm. Clamp ring made of cast steel with vibration reduction system....

Base mount for flag poles, with centering wedge, for pole diameter under 100 mm. Aluminium bushing with floor funnel and plastic centring wedge.

Panoramic mirror, half hemisphere, 180 degree vision, diameter 800 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Panoramic mirror, quarter hemisphere, 90 degree vision, diameter 600 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Marking paint, pack of 6 tins, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, traffic black RAL 9017. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

...are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

Marking paint, pack of 1 tin, blue. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, black. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, red. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 6 tins, black. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Flag pole, one-piece, cylindrical, internal rope-free raising device, lockable, height above ground 7 m, pole diameter 75 mm. Internal hoisting mechanism. Lockable with cylinder...

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

...base with the base plate allows precise adjustment of the pole. Recommended for pole lengths above 10 m.

Base mount for flag poles, made of steel, collapsible, for pole diameter under 75 mm. Made of hot dip galvanised steel. Especially safe pole setup. Special bolting of the pole...