Stainless steel combination ashtrays

Waste collector with ashtray insert, made of stainless steel, collector capacity approx. 38 l. Made of stainless steel to DIN 1.4016, ground finish. Removable protective hood and...

Mobile barrier fence made of polyethylene, with 16 mobile sections, collapsible. The mobile sections make it easy to adapt to the specific area to be blocked off. 2 non-marking...

Barrier fence, with patented hook-in snap locks, overall length 2580 mm. Effective mobile barrier. Patented suspension locks prevent unauthorised opening of the fences. Hot dip galvanised. Tubular frame Ø 38 mm. 13 solid bars, Ø 20 mm.

Traffic speed checks, max. 10 km/hr guide velocity, standard element, black. Easy assembly 1. Determine the number of elements required on the basis of the road width. Possibly...

...plan side clearance for pedestrians and forklifts. 2. Cut and position alignment bar. 3. Place alternate yellow and black elements on the alignment bar. 4. Fasten each element to the floor with 2 bolts.

...clearance for pedestrians and forklifts. 2. Cut and position alignment bar. 3. Place alternate yellow and black elements on the alignment bar. 4. Fasten each element to the floor with 2 bolts.

Alignment bar for traffic speed checks, up to max. 10 km/hr guide velocity, tube diameter 48 mm, per m. For positioning the individual standard and end elements.

Traffic speed check mounting set, for asphalt and concrete, double-pack bolts with plugs, pack of 2. For asphalt (min. 80 mm) and concrete.

...of 2 uprights to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

...10 mm) to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of...

...mm) to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of 2 uprights...

...x 10 mm) to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of...

...to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of 2 uprights...

Modular railing, extension unit, width 2000 mm, hot dip galvanised. Hot dip galvanised or with additional paintwork in yellow / black. Upright with base plate (160 x 140 x...

Modular railing, standard unit, width 1000 mm, yellow / black. Hot dip galvanised or with additional paintwork in yellow / black. Upright with base plate (160 x 140 x 10...

Modular railing, extension unit, width 1000 mm, yellow / black. Hot dip galvanised or with additional paintwork in yellow / black. Upright with base plate (160 x 140...

Modular railing, standard unit, width 1500 mm, yellow / black. Hot dip galvanised or with additional paintwork in yellow / black. Upright with base plate (160 x 140 x 10...

...to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

...uprights to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

...to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

Display case stand, 70 mm deep, for setting in concrete, 1 pair, natural. Stand set for setting in concrete, made of special aluminium profiles 80 x 40 mm.

Safety mirror, with frame, made completely of nickel chrome steel, reflective red/white frame, mirror dimensions WxH 600 x 400 mm. Steel frame, reflective red/white. Temperature resistant up to +300 °C.

Barrier posts made of rectangular steel profile, folding, with cylinder lock, with base plate for dowel fastening. All parts hot dip galvanised, post additionally painted...

Barrier chains, made of polyamide, light-duty design, per m, minimum purchase 50 m, black/yellow. Lasting, weather resistant colour polyamide. For especially harsh conditions:...

...hot dip galvanised steel with highly weather resistant plastic coating. Especially suitable for ramp barriers etc. End and connecting links made of plastic coated steel for a...

Waste collector made of sheet steel with protective hood, capacity 37 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Waste collector made of sheet steel with protective hood, capacity 50 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Tubular steel posts, for sheet steel waste containers without ashtrays, 60 mm diameter, length 1200 mm.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, white. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, brown. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 9 seating and back support planks, without arm rests, bench length 2.0 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Security/safety mirror, triangular, made of acryl glass, HxW 310 x 380 mm. Concave triangular acrylic glass mirror. Vice mounting bracket with flexible neck. Effortless attachment...

Surcharge for lock for barrier with gas pressure spring, on main post, triangular lock. Lock on main post (1) Fireman's triangle lock corresponding to DIN 3223 (2) Cylinder...

...paint in grey white RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above...

Professional display case, Softline design, vertical format, door opens 180° to the right, for A0, with legs. Maintenance free aluminium construction, brushed and silver anodised...

...paint in grey white RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above...

...a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective...

...RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above ground 2050 mm. Or with lighting (florescent tube). We recommend ordering a text bar to cover the lighting.

...in grey white RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above ground...

...and narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy...

...narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy assembly of the wheel holders to the angled steel base frame using the supplied instructions.

Bicycle rack, bars made of 18 mm steel tubing, double sided wheel guide, hot-dip galvanised, 10 parking spaces. Universal wheel holders are wide at the front for easy entry,...

...narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy assembly of the wheel holders to the angled steel base frame using the supplied instructions.

Flag pole, two-piece, cylindrical, pole diameter 75/60 mm, height above ground 7 m, incl. aluminium base mounting. External hoisting mechanism. Non-stretching hoist rope and cover cap. Simple aluminium base mounting.

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 7 m, pole diameter 75 mm. Interior, low resonance hoisting mechanism....

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

Magnetic text strip, for width 1285 mm, traffic yellow. Magnetic. Up to 20 characters on a single colour background. Black lettering on a yellow text bar, white lettering on a red, green or blue text bar. Please specify the desired text when ordering.

Paint marking set, incl. 1 can of signal yellow paint, 12 cans of traffic red RAL 3020. Consisting of one floor marking set with one can in yellow and twelve cans of marking paint...

...rubber seal. Pane made of 4 mm thick acrylic glass. Common locking cylinder locks, 2 keys for each lock. Sheet steel rear panel, magnetic, zinc plated on the outside, covered...