Corner brackets

Stairs for storage platform, mesh grid steps, 13 steps, for platform height 2500 mm. Step clearance width 1000 mm, inclination angle approx. 35°. Number of steps depends on the height of the platform. Mesh grid stairs.

Stairs for storage platform, mesh grid steps, 15 steps, for platform height 3000 mm. Step clearance width 1000 mm, inclination angle approx. 35°. Number of steps depends on the height of the platform. Mesh grid stairs.

Stairs for storage platform, mesh grid steps, 17 steps, for platform height 3500 mm. Step clearance width 1000 mm, inclination angle approx. 35°. Number of steps depends on the height of the platform. Mesh grid stairs.

Landing, to match the stairs, incl. railing on both sides with knee rail, LxW 1000 x 1200 mm. Incl. railing on both sides with hand rail and knee rail.

...Purlins made of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

...on both sides. With tongue and groove connection. Surface finish High quality powder coating. The following standard colours are available: reseda green RAL 6011, gentian blue...

...both sides. With tongue and groove connection. Surface finish High quality powder coating. The following standard colours are available: reseda green RAL 6011, gentian blue...

...made of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

...made of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

...made of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

Storage platform, extension shelf unit, max. surface load 500 kg/m², platform 5000 x 5000 mm. Material and construction Uprights and beams made of hot rolled steel. Purlins...

Storage platform, extension shelf unit, max. surface load 350 kg/m², platform 5000 x 4000 mm. Material and construction Uprights and beams made of hot rolled steel. Purlins...

...of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated on...

...of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

...made of cold rolled profiles. The purlins are hooked-in to the beams so that no height is lost. Floor covering Made of standard chipboard panels V 20 E1, 38 mm thick. Untreated...

Railing for storage platform, height 1000 mm, with hand rail and knee rail, per m. Railing height 1000 mm from top edge of platform. Hand rail made of round tubing. Railing supports and knee rails made of rectangular tubing. Foot rail made of angled sheet steel.

Transfer station, surface area 1500 x 1200 mm, secured with red/white chain. Recessed, 1500 x 1200 mm. Secured with a red/white chain.

Plug socket for multi-purpose building, earthed socket, twofold. Electrical installation 220 / 380 V Distribution with circuit breakers and FI switch.

Electric wall convection heater, with thermostat, power 2500 W, HxLxW 720 x 915 x 90 mm.

Accessories for prefab office with steel wall elements, full wall element, zinc plated sheet steel, powder coated, extra cost.

Materials container combination, painted, with wooden floor, 2 modules, external width 3100 mm. Small warehouses (up to 30 m²) can be created by joining containers at the long...

Materials container combination, zinc plated, without wooden floor, 3 modules, external width 3100 mm. Small warehouses (up to 30 m²) can be created by joining containers at the long sides.

Materials container combination, painted, with wooden floor, 3 modules, external width 3100 mm. Small warehouses (up to 30 m²) can be created by joining containers at the long...

Materials container combination, zinc plated, with wooden floor, 3 modules, external width 4100 mm. Small warehouses (up to 30 m²) can be created by joining containers at...

...long sides. Zinc plated or zinc plated and additionally powder coated on the outside. In all RAL colours, except special and fluorescent colours. Please specify the desired RAL colour in your order.

...sheeting. As an option, exterior walls can be painted in the RAL colour of your choice (roof zinc plated). Please specify RAL colour when ordering. Single exterior door,...

Electrical unit, distribution panel, automatic circuit breakers and fault protection, connection voltage 220 / 380 V. Consisting of distribution panel, automatic circuit breakers and fault protection switch. Connection voltage 220/380 V.

...Mesh width 50 x 65 mm, wire thickness 3.0 / 2.5 mm. Supplied complete with connecting materials (corner brackets, self-tapping screws).

Vario mesh partition section, including connecting materials, width 1500 mm. Vertical rectangular tubing (19 x 19 mm) and horizontal connectors (15 x 15 mm) with welded mesh....

Doors for Vario mesh partition, with tabs for padlock provided by the customer, left-hand limit stop. Doors with reinforced frame, vertical 30 x 20 mm, horizontal 25 x 15...

Ceiling mounting for Vario mesh partition, for room height max. 2.5 m, incl. tabs, fastening material and bolt for ceiling fastening. With tabs for bolting to the unit connectors (height adjustable). Fastening material including bolt for ceiling fastening.

Ceiling mounting for Vario mesh partition, for room height max. 2.7 m, incl. tabs, fastening material and bolt for ceiling fastening. With tabs for bolting to the unit connectors (height adjustable). Fastening material including bolt for ceiling fastening.

Ceiling mounting for Vario mesh partition, for room height max. 2.3 m, incl. tabs, fastening material and bolt for ceiling fastening. With tabs for bolting to the unit connectors (height adjustable). Fastening material including bolt for ceiling fastening.

U-rails for mesh partition, length 2200 mm, incl. screws, plugs and connector. For floor fastening (holes to be drilled by customer) and covering the tops of the units. Including screws, plugs and connector.

Accessories for multi-purpose building, window fan, for ventilation capacity 240 m³/h. Electrical installation 220 / 380 V Distribution with circuit breakers and FI switch.

Switch, socket combination, extra cost.

Protective machine fencing-wall section, height 2200 mm, width 250 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

...size 50 x 30 mm, wire thickness 3.0 / 2.5 mm. Easy to screw onto the uprights. Graphite black RAL 9011. Height 2200 mm, floor clearance 50 or 100 mm.

Protective machine fencing-wall section, height 2200 mm, width 600 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 700 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 800 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 900 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 500 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 1200 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 400 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Base supports for machine protection fence, length 2200 mm, zinc yellow RAL 1018. HxWxD 2300 x 50 x 70 mm. Floor clearance can also be adjusted up to 40 mm. Zinc yellow RAL 1018.

Add-on door set for protective machine fencing, for swivel doors, DIN right. Incl. top connection frame and X lock.

Add-on door set for protective machine fencing, for swivel doors, DIN left. Incl. top connection frame and X lock.

Add-on door set for protective machine fencing, for sliding doors, DIN right. Incl. top connection frame and X lock.

...with pictures guide you through the quick assembly process: 5 minutes with 2 people (3 x 2 metre size). Foundation work is not required. Only a level, firm surface is required. Foundation plans for all models can be provided on request.