Flag poles, one-piece, cylindrical, internal hoisting mechanism, with crank

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, external raising device, height above ground 7 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

Flag pole, one-piece, cylindrical, external raising device, height above ground 8 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 8 m, pole diameter 75 mm. Internal, low resonance hoisting mechanism. Special hex socket...

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

Base mount for flag poles, with centering wedge, for pole diameter under 75 mm. Aluminium bushing with floor funnel and plastic centring wedge.

Base mount for flag poles, made of steel, with rubber ring clip as vibration damper, for pole diameter under 100 mm. Clamp ring made of cast steel with vibration reduction...

Base mount for flag poles, made of steel, with rubber ring clip as vibration damper, for pole diameter under 75 mm. Clamp ring made of cast steel with vibration reduction system....

Base mount for flag poles, with centering wedge, for pole diameter under 100 mm. Aluminium bushing with floor funnel and plastic centring wedge.

Panoramic mirror, half hemisphere, 180 degree vision, diameter 800 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Panoramic mirror, quarter hemisphere, 90 degree vision, diameter 600 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Marking paint, pack of 6 tins, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, traffic black RAL 9017. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

...are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

Marking paint, pack of 1 tin, blue. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, black. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, red. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 6 tins, black. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, white. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 6 tins, red. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

...are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

...concealed hinge system - prevents magnets from falling between hinges and thus prevents door from getting stuck when closed. Includes 10 magnets and 1 document pouch.

...steel, in either gentian blue RAL 5010 or pure white RAL 9010, exterior painted with protective paint in grey white RAL 9002. Corners with bonded rubber seals for optimum weather resistance....

...a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective...

...9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above ground 2050 mm. Or with lighting (florescent tube). We recommend ordering a text bar to cover the lighting.

...concealed hinge system - prevents magnets from falling between hinges and thus prevents door from getting stuck when closed. Includes 10 magnets and 1 document pouch.

Professional display case, Softline design, horizontal format, door opens upwards 90°, for A2, with lighting. Maintenance free aluminium construction, brushed and silver anodised...

...model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer. Locks:...

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Locks: Main post fitted with profile cylinder lock as standard (incl. 3 keys). Nesting post with fittings for padlock (not supplied).

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Longer model with steel cable for increased stability. Main post and nesting post: Hot dip galvanised, for setting in concrete. Foundation work to be carried out by the customer....

...Locks: Main post fitted with profile cylinder lock as standard (incl. 3 keys). Nesting post with fittings for padlock (not supplied).

Surcharge for special paint finish for barrier with counter weight, white stand with red reflective film, red post.

Surcharge for special paint finish for barrier with counter weight, untreated aluminium boom, with red reflective foil, zinc plated post.

Panoramic mirror, full hemisphere, 360 degree vision, diameter 1250 mm. Hemispherical mirror includes installation kit for ceiling mounting.

...3 m. Roof trim On 3 sides, 150 mm high: Roof covering Made of trapezoidal sheet metal, zinc plated and additionally coated. Roof slopes down to the back. Delivered flat pack....

...m. Roof trim On 3 sides, 150 mm high: Roof covering Made of trapezoidal sheet metal, zinc plated and additionally coated. Roof slopes down to the back. Delivered flat...

...3 m. Roof trim On 3 sides, 150 mm high: Roof covering Made of trapezoidal sheet metal, zinc plated and additionally coated. Roof slopes down to the back. Delivered flat pack....

...3 m. Roof trim On 3 sides, 150 mm high: Roof covering Made of trapezoidal sheet metal, zinc plated and additionally coated. Roof slopes down to the back. Delivered flat pack....

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 9 m, pole diameter 100 mm. Internal, low resonance hoisting mechanism. Special hex socket...

Base mount for flag poles, made of steel, collapsible, for pole diameter under 100 mm. Made of hot dip galvanised steel. Especially safe pole setup. Special bolting of the pole...