Line marking systems, marking sets and marking devices

Floor marking tape made of vinyl, width 50 mm, orange. For temporary marking. Not suitable for frequent forklift traffic. Optimum laying temperature +10 °C. Roll length 33 m.

Marking paint, pack of 1 tin, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 12 cans, traffic green RAL 6024. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one...

Marking paint, contents 600 ml, pack of 6 cans, traffic grey RAL 7042. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Marking paint, pack of 6 tins, white. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, signal yellow RAL 1003. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, pack of 1 tin, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking device, variable line width, line width 50-75 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Marking device, variable line width, line width 100-130 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

...to ensure a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with...

...resistance. Patented, partially concealed hinge system - prevents magnets from falling between hinges and thus prevents door from getting stuck when closed. Includes 10 magnets and 1 document pouch.

Display case in Softline design, over size, viewable area 1504 x 924 mm, silver frame, blue rear panel. Maintenance free aluminium construction, silver anodised (E6/CO). Glass...

...to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective paint in grey...

Marking paint, pack of 6 tins, blue. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, grey. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, traffic green RAL 6024. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, pack of 6 tins, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 6 tins, grey. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 12 cans, signal yellow RAL 1003. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Marking paint, contents 600 ml, pack of 6 cans, traffic white RAL 9016. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

...Mounting on straight surfaces, e.g. walls, beams, girders. Large wide-angle vision Light and impact-resistant acrylic glass mirror with large wide-angle vision.

Security/safety mirror, round, large wide angle vision, mirror diameter 700 mm, wall bracket arm length 200 mm. Silver coating protected by special varnish. Includes bracket....

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

Flat roofed shelter, with round pipe support frame, base unit, single-sided, corrugated PVC. Construction: 4-piece tubular steel frame as supporting element at the sides,...

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

Flat roofed shelter, with round pipe support frame, base unit, double-sided, profiled sheet steel. Construction: 4-piece tubular steel frame as supporting element at the sides,...

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

Gutter and drain pipe for shelter, for round pipe support frame design, PVC. Made of PVC, complete with drain pipe. Supplied as standard on double sided model.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated in charcoal RAL 7016. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated, blue RAL 5005. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated, moss green RAL 6005. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated, pure white RAL 9010. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

Letter box, with level roof, HxWxD 320 x 360 x 100 mm, stainless steel. An improvement for every building. Made of sheet steel, powder coated or made of stainless steel. All models include a cylinder lock with 2 keys. Flat roof and flap on the front

Letter box, with folding sloped roof, HxWxD 360 x 360 x 100 mm, stainless steel. An improvement for every building. Made of sheet steel, powder coated or made of stainless steel. All models include a cylinder lock with 2 keys. Flat roof and flap on the front.

Light weight barrier fence, overall height 1100 mm, from 1 - 9 items. Hot dip galvanised. Tubular frame Ø 27 mm. 9 intermediate struts, Ø 15 mm.

Light weight barrier fence, overall height 1100 mm, from 10 - 19 items. Hot dip galvanised. Tubular frame Ø 27 mm. 9 intermediate struts, Ø 15 mm.

Light weight barrier fence, overall height 1100 mm, from 20 - 49 items. Hot dip galvanised. Tubular frame Ø 27 mm. 9 intermediate struts, Ø 15 mm.

Light weight barrier fence, overall height 1100 mm, from 50 - 99 items. Hot dip galvanised. Tubular frame Ø 27 mm. 9 intermediate struts, Ø 15 mm.

...Welded security rings on both sides for attaching bicycle locks, made of 12 mm round steel. For bolting in place or for setting in concrete. Height above floor 850 mm. U- or T-shaped model

Barrier post, plastic, incl. chain head, height 900 mm. With 2 reflective adhesive stripes. Includes chain head.

...= value retention. Finely ground surface as standard. Mounting types: (1) For setting permanently in concrete (2) With base plate to bolt in place (3) With base sleeve for setting in concrete. Removable, with triangular lock. Triangular key incl. (1 per order).

Stainless steel barrier posts, with chain head, with base plate for dowel fastening, diameter 61 mm. A good investment for the future. The stainless steel material conforms to DIN...

...DIN 1.4301 = value retention. Finely ground surface as standard. Mounting types: (1) For setting permanently in concrete (2) With base plate to bolt in place (3) With base...

...to DIN 1.4301 = value retention. Finely ground surface as standard. Mounting types: (1) For setting permanently in concrete (2) With base plate to bolt in place (3) With base...

...= value retention. Finely ground surface as standard. Mounting types: (1) For setting permanently in concrete (2) With base plate to bolt in place (3) With base sleeve for setting in concrete. Removable, with triangular lock. Triangular key incl. (1 per order).

...sheet steel, optionally additionally powder coated. Tubular arch and base plate are hot dip galvanised on all models. Top part is locked to body with two square locks. Top part serves as a clamping mechanism for 60 and 70 litre plastic waste sacks.

Waste collector with arched tubular stand, for 70 litre plastic sacks, with ashtray insert, powder coated purple red. Top part with rain protection hood and body made of zinc plated...

Waste collector with arched tubular stand, for 70 litre plastic sacks, without ashtray insert, powder coated purple red. Top part with rain protection hood and body made...