Lubricant storage tanks, for on-site and off-site transport

Gas cylinder storage box, zinc plated wire mesh sections without roof, HxWxD 2060 x 2100 x 1500 mm. Lockable double doors with profile cylinder, WxH 1000 x 2000 mm. Single cylinder storage or on gas cylinder pallets.

Support beam for modular pallet racking, length 2700 mm, max. load 3018 kg. To hook into 50 mm grid. Powder coated, pure orange RAL 2004.

Storage tank, made of zinc plated sheet steel, for on-site transport, capacity 400 l. For fixed installation and for on-site transport. With simple, open steel base pallet. Only approved for on-site transport.

Gas cylinder storage box, zinc plated wire mesh sections without roof, HxWxD 2060 x 2400 x 1500 mm. Lockable double doors with profile cylinder, WxH 1000 x 2000 mm. Single cylinder storage or on gas cylinder pallets.

...used in conjunction with drum pallets (see combination). Double panelled construction, especially sturdy, low overall height. Max. load 730 kg/m 2 (distributed load).

Universal multipurpose trays, set of 4, one tray each 0.5 / 1.5 / 3.0 / 10.0 litres. Made of white polypropylene, rounded edge. Universally usable As a table sump tray for...

Universal multipurpose trays, single tray, capacity 21 litres. Made of white polypropylene, rounded edge. Universally usable As a table sump tray for environmentally...

Universal multipurpose trays, single tray, capacity 39 litres. Made of white polypropylene, rounded edge. Universally usable As a table sump tray for environmentally hazardous, aggressive liquids, as an experiment tray, storage tray for instruments, floor protection tray etc.

Safety drum funnel, diameter x height 273 x 254 mm, sheet steel, zinc plated and powder coated red. Sheet steel, zinc plated and powder coated in red. Ø x height 273 x 254 mm.

Safety drum lids, for 200 litre drums, sheet steel, painted red. Sheet steel, painted red. Suitable for drum Ø 565 - 578 mm.

Sump pallet made of GRP, without connecting brackets, for placing on the ground or loosely on pallets, with grate. Suitable for Euro pallets 800 x 1200 mm. For 2 x 120 l or...

Sump pallet made of GRP, with connecting brackets, for Euro pallets, with grate. Suitable for Euro pallets 800 x 1200 mm. For 2 x 120 l or 6 x 60 l drums or small containers....

Sump pallet made of GRP, steel mesh grid zinc plated, LxWxH 850 x 850 x 390 mm. Can be set up individually or linked together to form a continuous unit. With zinc plated steel grate or with chemical resistant GRP grate.

Sump pallet made of GRP, steel mesh grid zinc plated, LxWxH 1280 x 850 x 270 mm. Can be set up individually or linked together to form a continuous unit. With zinc plated steel grate or with chemical resistant GRP grate.

Mobile sump trays made of GRP, with steel grate, LxWxH 1090 x 860 x 1080 mm. Sump tray with removable, hot dip galvanised grate and hot dip galvanised dolly with impact protection.2 swivel castors, 2 fixed castors, and a push handle.

Gas cylinder storage box, zinc plated wire mesh sections without roof, HxWxD 2060 x 3100 x 1500 mm. Lockable double doors with profile cylinder, WxH 1000 x 2000 mm. Single cylinder storage or on gas cylinder pallets.

Universal sump trays made of PE, LxWxH 1300 x 620 x 80 mm, 40 l collection capacity, without grate, max. surface load approx. 50 kg. Highly resistant to oils, acids and alkaline solutions. Light, robust, and durable.

Drum storage with GRP sump tray, hot dip galvanised steel parts, for 6 x 60 l and/or small containers, with 3 mesh grid shelves and drum supports.

Mesh grid shelf, to compensate for uneven floors, for WxD 2100 x 1085 mm. To compensate for uneven floors.

Double panel gate, lockable with profile cylinder, for WxD 3100 x 2100 mm. Lockable with profile cylinder.

Holder, for upright storage of gas cylinders, with safety chain. For vertical storage, with safety chain.

...against splashing and leakage is required. Versions with 210 litre sump capacity are suitable for the storage of 200 litre drums.

Hazardous goods workstation, sturdy construction, tubular aluminium frame, Basic, module A 1, HxWxD 1100 x 900 x 600 mm. Consists of: transparent side panels, melamine coated...

Hazardous goods workstation, sturdy construction, tubular aluminium frame, Basic, module A 3, HxWxD 1100 x 1800 x 600 mm. Consists of: transparent side panels, melamine coated...

Hazardous goods workstation, sturdy construction, tubular aluminium frame, Basic, module B 2, HxWxD 1400 x 1200 x 750 mm. Consists of: transparent side panels, melamine coated...

...rear panel, fresh air supply system, ventilation (intake/extraction) monitoring system with control display and audible alarm. Interior lighting. Power connection for 230 V / 50 Hz. Supplied without worktop.

Drum stand with support bracket, height 475 mm, length 530 mm, width 835 mm. With support bracket for horizontal storage and filling. Height 475 mm.

...rear panel, fresh air supply system, ventilation (intake/extraction) monitoring system with control display and audible alarm. Interior lighting. Power connection for 230 V / 50 Hz. Supplied without worktop.

Hazardous goods workstation accessories, transparent rear panel, for Basic module, HxW 1400 x 1200 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 900 x 750 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 1200 x 750 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 1800 x 600 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 1800 x 750 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 1200 x 600 mm.

Hazardous goods workstation accessories, melamine coated worktop, for Basic module, WxD 900 x 600 mm.

Hazardous goods workstation, sturdy construction, tubular aluminium frame with stainless steel worktop, Comfort, module A 2, HxWxD 1100 x 1200 x 600 mm. Consists of:...

...side panels, melamine coated rear panel, V2A stainless steel worktop (seamlessly welded tray), fresh air supply system, ventilation (intake/extraction) monitoring system with...

Hazardous goods workstation, sturdy construction, tubular aluminium frame with stainless steel worktop, Comfort, module B 3, HxWxD 1400 x 1800 x 750 mm. Consists of: transparent...

Hazardous goods workstation accessories, transparent rear panel, for Comfort module, HxW 1400 x 1200 mm.

Hazardous goods workstation accessories, transparent rear panel, for Basic module, HxW 1100 x 900 mm.

Measuring and transfer cans, with precise dispensing spout, height 200 mm, capacity 1 litre. With flame trap, PTFE seal. Dosing tap with pressure release valve, rotates 360°. Safety valve in dosing tap prevents explosions.

Measuring and transfer cans, with screw-on lid, height 170 mm, capacity 1 litre. With flame trap, PTFE seal. Safety valve in screw cap prevents explosions.Approved for transport (GGVSE).

Accessory, for shallow plastic sump trays, cross connector.

Universal sump trays made of PE, LxWxH 1300 x 620 x 80 mm, 40 l collection capacity, with steel grate, max. surface load approx. 50 kg. Highly resistant to oils, acids and alkaline solutions. Light, robust, and durable.

Double panel gate, lockable with profile cylinder, for WxD 2100 x 1085 mm. Lockable with profile cylinder.

Double panel gate, lockable with profile cylinder, for WxD 3100 x 1500 mm. Lockable with profile cylinder.

Double panel gate, lockable with profile cylinder, for WxD 2400 x 1500 mm. Lockable with profile cylinder.

Double panel gate, lockable with profile cylinder, for WxD 2100 x 1500 mm. Lockable with profile cylinder.

Mesh grid shelf, to compensate for uneven floors, for WxD 3100 x 2100 mm. To compensate for uneven floors.

Drum stand with support bracket, height 475 mm, length 595 mm, width 1150 mm. With support bracket for horizontal storage and filling. Height 475 mm.