Masterguard machine protective fencing - wall sections

Protective machine fencing-wall section, height 2200 mm, width 500 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 1200 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Protective machine fencing-wall section, height 2200 mm, width 400 mm. Consisting of rectangular tubing, vertical 20 x 30 mm, horizontal 25 x 15 mm, mesh size 51 x 21 mm, floor clearance 100 mm. Graphite black RAL 9011. Height 2200 mm.

Base supports for machine protection fence, length 2200 mm, zinc yellow RAL 1018. HxWxD 2300 x 50 x 70 mm. Floor clearance can also be adjusted up to 40 mm. Zinc yellow RAL 1018.

Add-on door set for protective machine fencing, for swivel doors, DIN right. Incl. top connection frame and X lock.

Add-on door set for protective machine fencing, for swivel doors, DIN left. Incl. top connection frame and X lock.

Add-on door set for protective machine fencing, for sliding doors, DIN right. Incl. top connection frame and X lock.

Add-on door set for protective machine fencing, for sliding doors, DIN left. Incl. top connection frame and X lock.

U-rails for mesh partition, zinc yellow RAL 1018, length 800 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 500 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 900 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 600 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 400 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 700 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 1500 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 1200 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 250 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

U-rails for mesh partition, zinc yellow RAL 1018, length 1000 mm. For the top and bottom edges of the wall elements.Zinc yellow RAL 1018. (Not mandatory according to EU norm).

Wall section for mesh partition system, height 1100 mm, width 1500 mm.

Wall section for mesh partition system, height 1100 mm, width 250 mm.

Wall section for mesh partition system, height 1100 mm, width 1000 mm.

Wall section for mesh partition system, height 2200 mm, without output switch, width 400 mm.

Wall section for mesh partition system, height 2200 mm, without output switch, width 1200 mm.

Wall section for mesh partition system, height 2200 mm, without output switch, width 700 mm.

Wall section for mesh partition system, height 2200 mm, without output switch, width 1500 mm.

Wall section for mesh partition system, height 1100 mm, width 700 mm.

Wall section for mesh partition system, height 1100 mm, width 1200 mm.

Wall section for mesh partition system, height 2200 mm, without output switch, width 250 mm.

Connector for mesh partition system, 90 degree corner bracket, pack of 3. For connecting wall elements at a corner. For wall element height 2200 mm = 3 brackets, per 1100 mm add-on element 1 bracket required. Pack of 3.

Connector for mesh partition system, variable three-way elbow connector, angle range 0 - 180 degrees, pack of 2. The elements can be connected at any angle between 0° - 180°. Same requirements as the corner connectors. Pack of 2.

Connector for mesh partition system, U-rails, length 2200 mm, incl. screws and connector. To stabilise the elements when positioned next to each other, the top edge is reinforced...

...be used together with the door add-on sets described below to form double doors in any width.Can be assembled in any way required. Can open outwards or inwards.

Add-on door sets for mesh partition system, for double doors, single door, for closing with padlock provided by the customer. The 2200 mm wall elements can be used together with...

Add-on door sets for mesh partition system, for sliding doors, door width max 2,400 mm, for a Euro lock cylinder provided by the customer. The 2200 mm wall elements can be used...

Add-on door sets for mesh partition system, for sliding doors, door width max 1500 mm, for a Euro lock cylinder provided by the customer. The 2200 mm wall elements can be used together...

...with the door add-on sets described below to form sliding doors in various widths. Complete with all fittings, carrying rails, ball bearing runners and floor guide.

...together with the door add-on sets described below to form sliding doors in various widths. Complete with all fittings, carrying rails, ball bearing runners and floor guide.

Add-on door sets for mesh partition system, for sliding doors, door width max 3,000 mm, for a Euro lock cylinder provided by the customer. The 2200 mm wall elements can be used together...

...Profiled steel runners, 60 mm ground clearance, for secure forklift transport and for floor ventilation. 4 crane eyelets as standard. Delivery Delivered flat pack or assembled....

Tool strip for hanging tools with a shaft, for material container, with 5 hooks. Removable, zinc plated tool strip for shovels, spades, brooms, etc.

Base supports, zinc plated, for element heights 2200/3300/4400 mm, HxWxD 2250x25x75 mm. Made of box profile. With welded fixing tabs for screwing the wall elements to the front side...

...side of the supports. Floor securing plate with 2 drill holes. Complete with securing material for wall elements and floor dowel connection. Floor clearance 50 mm.

...of the supports. Floor securing plate with 2 drill holes. Complete with securing material for wall elements and floor dowel connection. Floor clearance 50 mm.

Base supports, zinc plated, for element heights 4400 mm, HxWxD 2200x50x50 mm. Made of box profile. With welded fixing tabs for screwing the wall elements to the front side of...

...sheeting. As an option, exterior walls can be painted in the RAL colour of your choice (roof zinc plated). Please specify RAL colour when ordering. Single exterior door,...

...instructions with pictures guide you through the quick assembly process: 5 minutes with 2 people (3 x 2 metre size). Foundation work is not required. Only a level, firm surface is required. Foundation plans for all models can be provided on request.

...As a prefab office, test and measurement room, control room, noise protection cabin, break or social room with toilet facilities etc.

Multi-purpose building for indoor installations, rounded corner model, 1060 mm grid, exterior LxW 2.22 x 1.16 m. The variable modular system for virtually any size and purpose: As...

Multi-purpose building for indoor installations, rounded corner model, 1060 mm grid, exterior LxW 2.22 x 2.22 m. The variable modular system for virtually any size and purpose:...

Multi-purpose building for indoor installations, rounded corner model, 1060 mm grid, exterior LxW 4.34m x 2.22m. The variable modular system for virtually any size and purpose:...