Modular railing, zinc plated or additionally painted

...to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

...of 2 uprights to bolt in place, 2 cross pipes and 4 pipe connectors. Extension section Consists of 1 upright to bolt in place, 2 cross pipes and 4 pipe connectors.

...mm) to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of 2 uprights...

...to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of 2 uprights...

...mm) to bolt in place. Clamps and end caps made of aluminium, pipe connectors made of non-conductive plastic.Clamp screws made of V2A steel. Standard section Consists of 2...

Modular railing, extension unit, width 2000 mm, yellow / black. Hot dip galvanised or with additional paintwork in yellow / black. Upright with base plate (160 x 140 x 10 mm)...

Display case stand, 70 mm deep, for setting in concrete, 1 pair, natural. Stand set for setting in concrete, made of special aluminium profiles 80 x 40 mm.

Safety mirror, with frame, made completely of nickel chrome steel, reflective red/white frame, mirror dimensions WxH 600 x 400 mm. Steel frame, reflective red/white. Temperature resistant up to +300 °C.

Barrier posts made of rectangular steel profile, folding, with cylinder lock, with base plate for dowel fastening. All parts hot dip galvanised, post additionally painted...

...hot dip galvanised steel with highly weather resistant plastic coating. Especially suitable for ramp barriers etc. End and connecting links made of plastic coated steel for...

...hot dip galvanised steel with highly weather resistant plastic coating. Especially suitable for ramp barriers etc. End and connecting links made of plastic coated steel for a...

Waste collector made of sheet steel with protective hood, capacity 37 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Waste collector made of sheet steel with protective hood, capacity 50 l, cover with additional orange powder coating, without ashtray. Made of hot dip galvanised sheet steel....

Tubular steel posts, for sheet steel waste containers without ashtrays, 60 mm diameter, length 1200 mm.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, white. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, brown. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 12 seating and back support planks, without arm rests, bench length 1.5 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

Plastic bench, with 9 seating and back support planks, without arm rests, bench length 2.0 m, green. Seat and back rest slats made of PVC, 50 x 30 mm. Feet made of polypropylene. Prepared for floor anchoring.

...without tools or drilling. Suitable for temporary use, as it can be removedwithout leaving marks behind. For short observation distances.

...lock (incl. 2 keys) Lock on nesting post With snap lock on the end of the beam (3) With fireman's triangle lock (4) With cylinder lock (incl. 2 keys)

...a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective...

...9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above ground 2050 mm. Or with lighting (florescent tube). We recommend ordering a text bar to cover the lighting.

...paint in grey white RAL 9002. Includes 10 magnets and 1 document pouch. Optionally with aluminium legs, rectangular tubing 50 x 100 mm. Overall height 2600 mm, height above...

...a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with protective...

...hinges and thus prevents door from getting stuck when closed. Common key cylinder locks, 2 keys per lock. Rubber seals are bonded to the corners to ensure a tight seal and to prevent...

...between hinges and thus prevents door from getting stuck when closed. Common key cylinder locks, 2 keys per lock. Rubber seals are bonded to the corners to ensure a tight...

...and narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy...

...narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy assembly of the wheel holders to the angled steel base frame using the supplied instructions.

...and narrower towards the back to ensure a firm hold. Wheel holders made of steel tubing, Ø 18 mm, prepared for joining in rows and for fixing to floor. Supplied flat pack, easy...

Bicycle rack, bars made of 18 mm steel tubing, double sided wheel guide, hot-dip galvanised, 12 parking spaces. Universal wheel holders are wide at the front for easy entry, and...

Flag pole, two-piece, cylindrical, pole diameter 75/60 mm, height above ground 7 m, incl. aluminium base mounting. External hoisting mechanism. Non-stretching hoist rope and cover cap. Simple aluminium base mounting.

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 7 m, pole diameter 75 mm. Interior, low resonance hoisting mechanism....

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, internal rope-free raising device with hand crank, height above ground 8 m, pole diameter 100 mm. Interior, low resonance hoisting mechanism....

...Special hex socket crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. See accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, external raising device, height above ground 7 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

Flag pole, one-piece, cylindrical, external raising device, height above ground 8 m, pole diameter 75 mm. External hoisting mechanism. Non-stretching hoist rope and cover cap. Suitable base mounts can be found in the table.

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

...crank for easy flag attachment and protection against theft. Head cover. Adjustable plastic gliders for various flag sizes. Boom Ø 40 mm for flag widths up to 150 cm with fastening loops or hollow seam. See Accessories for suitable base mounts.

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 8 m, pole diameter 100 mm. Internal, low resonance hoisting mechanism. Special hex socket...

Base mount for flag poles, with centering wedge, for pole diameter under 75 mm. Aluminium bushing with floor funnel and plastic centring wedge.

...system. Cast flush base cover for when the pole is removed. Can be adjusted after installation with 2 eccentric adjusting rings. Allows alignment adjustments of 1% after placing in the base sleeve.

...Cast flush base cover for when the pole is removed. Can be adjusted after installation with 2 eccentric adjusting rings. Allows alignment adjustments of 1% after placing in the base sleeve.

Base mount for flag poles, with centering wedge, for pole diameter under 100 mm. Aluminium bushing with floor funnel and plastic centring wedge.

Panoramic mirror, half hemisphere, 180 degree vision, diameter 800 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Panoramic mirror, quarter hemisphere, 90 degree vision, diameter 600 mm. Made of durable plastic. For wall mounting, easy installation with fixing holes in the rim. Observation distance between 3 m and 8 m (recommended distance).

Marking paint, pack of 6 tins, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Flag pole, one-piece, cylindrical, internal rope-free raising device, lockable, height above ground 7 m, pole diameter 75 mm. Internal hoisting mechanism. Lockable with cylinder...

Flag pole, one-piece, cylindrical, with rotary extension arm, height above ground 9 m, pole diameter 100 mm. Internal, low resonance hoisting mechanism. Special hex socket...

...base with the base plate allows precise adjustment of the pole. Recommended for pole lengths above 10 m.