Safety railing - rails

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, yellow/black powder-coated, for bolt on fastening, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

...coated in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, monochrome powder-coated, for bolt on fastening, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, zinc plated, for bolting, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated in colour....

Safety bar with knee rail, zinc plated, for bolt on fastening, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, yellow/black powder-coated, for bolting, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, zinc plated, for setting in concrete, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, yellow/black powder-coated, for concreting in, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Security/safety mirror for indoor and outdoor use, rectangular type, LxW 800 x 600 mm. Incl. bracket for mounting on walls and posts with Ø 50 - 80 mm.

Security/safety mirror for indoor and outdoor use, rectangular type, LxW 1000 x 800 mm. Incl. bracket for mounting on walls and posts with Ø 50 - 80 mm.

Colour marking device with variable line width, marking system set, set white. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Colour marking device with variable line width, marking system set, set yellow. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Floor marking tape made of vinyl, width 50 mm, orange. For temporary marking. Not suitable for frequent forklift traffic. Optimum laying temperature +10 °C. Roll length 33 m.

Marking paint, pack of 1 tin, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

Marking paint, contents 600 ml, pack of 12 cans, traffic grey RAL 7042. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, contents 600 ml, pack of 6 cans, traffic grey RAL 7042. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Marking paint, pack of 6 tins, white. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, signal yellow RAL 1003. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, pack of 1 tin, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking device, variable line width, line width 50-75 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Marking device, variable line width, line width 100-130 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

...brushed and silver anodised (E2/C0), with integrated ventilation and water drainage system. Glass pane made of 5 mm acrylic glass. Patented, concealed hinge system - prevents...

...resistance. Patented, partially concealed hinge system - prevents magnets from falling between hinges and thus prevents door from getting stuck when closed. Includes 10 magnets and 1 document pouch.

...locks, 2 keys per lock. Rubber seals are bonded to the corners to ensure a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet...

Professional display case, Softline design, horizontal format, door opens downwards 180°, for A2, with legs and lighting. Maintenance free aluminium construction, brushed and silver...

Marking paint, pack of 6 tins, blue. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, grey. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

Marking paint, pack of 6 tins, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 6 tins, grey. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 12 cans, signal yellow RAL 1003. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Marking paint, contents 600 ml, pack of 6 cans, traffic white RAL 9016. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Security/safety mirror, round, large wide angle vision, mirror diameter 800 mm, wall bracket arm length 200 mm. Silver coating protected by special varnish. Includes bracket....

Security/safety mirror, round, large wide angle vision, mirror diameter 700 mm, wall bracket arm length 200 mm. Silver coating protected by special varnish. Includes bracket....

...Extension unit: One tubular support and roof. The roof protrudes 250 mm on each side. Paint finish: Roof and rear panel powder coated on both sides in grey white RAL 9002....

...Extension unit: One tubular support and roof. The roof protrudes 250 mm on each side. Paint finish: Roof and rear panel powder coated on both sides in grey white RAL 9002. Supplied...

Flat roofed shelter, with round pipe support frame, extension unit, single-sided, corrugated PVC. Construction: 4-piece tubular steel frame as supporting element at the sides,...

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof. Extension...

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

...with bolt-on foot plates. Sloped roof consisting of two purlins with trapezoidal covering. Clearance between supports 4300 mm. Standard unit: Two tubular supports and roof....

Gutter and drain pipe for shelter, for round pipe support frame design, PVC. Made of PVC, complete with drain pipe. Supplied as standard on double sided model.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated in charcoal RAL 7016. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

Standard letter box, HxWxD 400 x 280 x 115 mm, sheet steel, powder coated, blue RAL 5005. With hinged, sloping roof, flap at top. Made of sheet steel, powder coated or made of stainless steel. With cylinder lock incl. 2 keys.

...plated sheet metal. Robust stand pipe for setting in concrete, hot dip galvanised and additionally powder coated in silver colour.

Waste collector with arched tubular stand, for 70 litre plastic sacks, with ashtray insert, hot dip galvanised. Top part with rain protection hood and body made of zinc plated...

Waste collector with arched tubular stand, for 70 litre plastic sacks, with ashtray insert, powder coated purple red. Top part with rain protection hood and body made of zinc plated...

Waste collector with arched tubular stand, for 70 litre plastic sacks, without ashtray insert, powder coated purple red. Top part with rain protection hood and body made...

...in the floor. Can be placed next to each other to span larger areas. This hose and cable bridge can also be shortened to the required length on site.