Sheet metal container trucks with tilting container and forklift pockets

Bulk material truck, tilting skip, capacity 400 litres, with forklift pockets, without lid. For unloading at ground level. Anti-tipping device. Cover long distances comfortably:...

...reinforced with steel frame. Zinc plated mesh. With metal base Tubular steel base with round rods placed at 60 mm intervals. All parts are zinc plated.

Roll container accessories, back panel attached by screws, 640x810x1620 mm.

Roll container accessories, back panel attached by screws, 720 x 810 x 1520 mm, powder coated, for plastic pallet.

Screw-on rear panel, for roll containers, with metal base, width 720 mm.

...Two transporters with self-braking safety spindle winch and fixed strap. Strap length 5 m. Function Slide the paddles under the goods to be transported, adjust the top rests...

...down exactly. Function Slide the paddles under the goods to be transported. Tighten the belts. Lift the load the same amount on both sides and start the transport. Technical...

Aluminium packet truck, max. load 100 kg, material anodised aluminium. Anodised aluminium, does not discolour, remains clean and attractive. Safety handles to protect against...

Folding transport truck, max. load 125 kg, stainless steel frame.

Sack truck accessory, with glide runners and folding foot plate, carrying arms for retrofitting.

...with roller bearings. Chair truck with height adjustable cantilever arms for transporting several chairs.

Chair truck made of steel, with fixed footplate, max. load 200 kg, pneumatic tyres. Safety plastic handles. Powder coated as standard in light blue RAL 5012. Wheels with...

Mobile welding protection screens, single unit design, HxW 1900 x 2100 mm, with lamellar curtain, red. Rectangular tubing with blue epoxy powder coating. Complete set with...

...protection film (0.4 mm thick) or with lamella curtains (lamella 300 x 2 mm). 4 swivel castors, 2 with wheel stops. Floor clearance with lamella curtain 600 mm, with film curtain 300 mm.

Mobile welding protection screens, 3 part design, HxW 1900 x 3700 mm, with lamellar curtain, transparent. Rectangular tubing with blue epoxy powder coating. Complete set...

Mobile welding protection screens, 3 part design, HxW 1900 x 3700 mm, with welding protection film, red. Rectangular tubing with blue epoxy powder coating. Complete set...

...Complete set with welding protection film (0.4 mm thick) or with lamella curtains (lamella 300 x 2 mm). 4 swivel castors, 2 with wheel stops. Floor clearance with lamella curtain 600 mm, with film curtain 300 mm.

Mobile welding protection screens, 3 part design, HxW 1900 x 3700 mm, with welding protection film, dark green. Rectangular tubing with blue epoxy powder coating. Complete set...

Mobile welding protection screens, 3 part design, HxW 1900 x 3700 mm, with welding protection film, transparent. Rectangular tubing with blue epoxy powder coating....

Active solar welding protection hood, robust and impact resistant, protection level DIN 9 - 13. Robust, impact resistant material - UV/ IR resistant plastic. Solar...

Accessory for protective welding hood, service pack, supplies for helmet. Freshen up your helmet with the following supplies: 30 external protection panels 10 internal protection panels 10 headbands

Open fronted storage bin set, for fitting out 1 louvred panel, pack of 32 bins, LxWxH 103 x 121 x 62 mm. For fitting out one louvred panel to individual requirements. Resistant...

Table trolley, steel, max. load 150 kg, with 2 tiers, pneumatic tyres, 2 swivel castors with wheel stops. Shelves made of moulded chipboard with polyurethane coated finish....

...polyurethane coated finish. Frame powder coated as standard in light blue RAL 5012. 2 swivel castors with double stops and 2 fixed castors. All wheels with roller bearings.

Table trolley made of steel, max. load 150 kg, LxW 770 x 470 mm, 2 shelves, swivel castors with wheel stops. Shelves made of moulded chipboard with polyurethane coated...

Table trolley made of steel, max. load 150 kg, LxW 770 x 470 mm, 3 shelves, swivel castors with wheel stops. Shelves made of moulded chipboard with polyurethane coated...

Table trolley, max. load 150 kg, with 3 tiers, pneumatic tyres.

Table trolley, steel, with cupboard and shelves, 1 cupboard, 3 shelves, pneumatic tyres, 2 swivel castors with double stops. Lockable sheet steel cupboard with 2 shelves. All locks with common key.

Table trolley, steel, with cupboard and shelves, 1 drawer unit, 1 metal cupboard, solid rubber tyres, 2 swivel castors with wheel stops. 4 drawers approx. 85 mm high, with ball bearing guides and central lock. Lockable cupboard with 2 shelves.

...edge. Powder coated as standard in light blue RAL 5012. 2 swivel castors and 2 fixed castors, wheel Ø 160 mm, solid rubber tyres, roller bearings. Swivel castors with double stops.

General purpose trolley, light blue RAL 5012, 3 shelves, max. load 350 kg, 2 swivel castors and 2 fixed castors, platform LxW 900 x 500 mm, overall height 915 mm. 40 mm raised...

General purpose trolley, light blue RAL 5012, 3 shelves, max. load 350 kg, 2 swivel castors and 2 fixed castors, platform LxW 900 x 500 mm, overall height 1215 mm. 40 mm raised...

Aluminium platform trolley, aluminium platform with ribbed structure, max. load 100 kg, platform LxW 850 x 430 mm. 2 swivel castors with wheel stops and 2 fixed castors with non-marking solid rubber tyres, roller bearings, Ø 100 mm.

Table trolley with anodised finish, max. load 100 kg, shelf heights 270 / 770 mm, platform LxW 1000 x 600 mm. Platforms made of moulded chipboard with polyurethane coated finish. Raised wooden edge strip. 2 swivel castors and 2 fixed castors, Ø 100 mm, roller bearings.

Cantilever trolley, max. load 350 kg, standard model without additional shelves, base frame LxW 1550 x 800 mm. Base frame LxW 1550 x 800 mm. Overall height 1830 mm. Powder coated...

...hook-on shelves (accessory). Standard model powder coated light blue RAL 5012 as standard. 4 swivel castors, 2 with double stops, roller bearings and solid rubber tyres.

Turntable truck up to 1.5 t, platform 2000x1000 mm, max. load 1000 kg, solid rubber tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 1250x800 mm, max. load 1000 kg, solid rubber tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 1250x800 mm, max. load 1000 kg, pneumatic tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 1600x900 mm, max. load 1000 kg, solid rubber tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 1600x900 mm, max. load 1000 kg, pneumatic tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 2000x1000 mm, max. load 1000 kg, pneumatic tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 2000x1000 mm, max. load 1500 kg, solid rubber tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck up to 1.5 t, platform 2000x1000 mm, max. load 1500 kg, pneumatic tyres. Platform Made of moulded chipboard for 500 kg max. load. Made of plywood sheet for 1000 and 1500 kg max. loads. Both types with polyurethane coated finish.

Turntable truck with 4 side panels, platform 1960x960 mm, max. load 1000 kg, pneumatic tyres. Plywood side panels, 200 mm high, channel steel frame. Rear and side panels are hinged and can be folded down. Fixed front panel.

...exactly. Function Slide the paddles under the goods to be transported. Tighten the belts. Lift the load the same amount on both sides and start the transport. Technical description...

...welding protection film (0.4 mm thick) or with lamella curtains (lamella 300 x 2 mm). 4 swivel castors, 2 with wheel stops. Floor clearance with lamella curtain 600 mm, with film curtain 300 mm.

Active solar welding protection hood, robust and impact resistant, DIN 11 protection level. Robust, impact resistant material - UV/ IR resistant plastic. Solar cells - no need...

Steel cylinder pallet, for 8 cylinders, each with a diameter of 250 mm, hot dip galvanised.

Turntable truck with 4 side panels, platform 1210x760 mm, max. load 500 kg, solid rubber tyres. Plywood side panels, 200 mm high, channel steel frame. Rear and side panels are hinged and can be folded down. Fixed front panel.