Sheet steel stacking containers, low profile design, LxW 1200 x 1000 mm

...with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

...posts with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

...posts with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

...posts with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

...posts with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

Stacking container made of sheet steel, low profile design, LxW 1200 x 1000 mm, closed model, flame red RAL 3000, order quantity 10 +. Material thickness 1.5 mm. Corner posts...

Stacking container made of sheet steel, low profile design, LxW 1200 x 1000 mm, closed model, gentian blue RAL 5010, order quantity 10 +. Material thickness 1.5 mm. Corner posts...

Solid wall stacking containers, WxL 1000 x 1200 mm, half open, weight 53 kg, red RAL 3000, order quantity 5 - 9. Robust model. Material thickness 1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates.

Solid wall stacking containers, WxL 1000 x 1200 mm, half open, weight 53 kg, blue RAL 5010, order quantity 5 - 9. Robust model. Material thickness 1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates.

Solid wall stacking containers, WxL 1000 x 1200 mm, half open, weight 53 kg, red RAL 3000, order quantity 10 +. Robust model. Material thickness 1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates.

Solid wall stacking containers, WxL 1000 x 1200 mm, half open, weight 53 kg, blue RAL 5010, order quantity 10 +. Robust model. Material thickness 1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates.

...is placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet...

...is placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift,...

...is placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet truck...

...is placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet truck...

...is placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet truck...

Hinged bottom skip, capacity 0.5 m³, zinc plated, height 860 mm. Sturdy steel construction with smooth inner walls. The base flap closes automatically when the container is...

Hinged bottom skip, capacity 0.75 m³, zinc plated. Sturdy steel construction with smooth inner walls. The base flap closes automatically when the container is placed on the ground...

Hinged bottom skip, capacity 1.0 m³, zinc plated, height 1160 mm. Sturdy steel construction with smooth inner walls. The base flap closes automatically when the container is...

Hinged bottom skip, capacity 1.5 m³, zinc plated. Sturdy steel construction with smooth inner walls. The base flap closes automatically when the container is placed on...

Hinged bottom skip, capacity 2.0 m³, zinc plated. Sturdy steel construction with smooth inner walls. The base flap closes automatically when the container is placed on the ground...

Bottom chute for hinged bottom skip, for container capacity 0.5 - 0.75 m³, with bottom chute, zinc plated, extra cost. Centring panels on the bottom chute prevent spilling at the sides.

Bottom chute for hinged bottom skip, for container capacity 1.0 m³, with bottom chute, extra cost. Centring panels on the bottom chute prevent spilling at the sides.

Sheet steel stacking container, heavy duty model, length x width 1200 x 1000 mm, mouse grey RAL 7005, order quantity 5+. For heavy loads / stacked loads. Can be lifted with...

...Field for labelling. Torsion free corner posts. Hollow profile feet, especially resistant to buckling. Base and side panels made of profiled 2 mm sheet metal. Reinforced...

Sheet steel stacking container, heavy duty model, length x width 1200 x 1000 mm, mouse grey RAL 7005, order quantity 1+. For heavy loads / stacked loads. Can be lifted with...

Sheet steel stacking container, heavy duty model, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 10+. For heavy loads / stacked loads. Can be lifted with a...

...Field for labelling. Torsion free corner posts. Hollow profile feet, especially resistant to buckling. Base and side panels made of profiled 2 mm sheet metal. Reinforced rim....

Sheet steel stacking container, heavy duty model, length x width 1200 x 800 mm, mouse grey RAL 7005, order quantity 10+. For heavy loads / stacked loads. Can be lifted with...

...wheel stops, Ø 125 mm, made of nylon. Easy to operate: can be tipped manually over the wheel axle of the fixed castors in a pit or skip placed below.

...starts the tilting process (centre of gravity is in front of the fork tips). The tilt is limited to 90° and protects the container from damage.

...and immediately starts the tilting process (centre of gravity is in front of the fork tips). The tilt is limited to 90° and protects the container from damage.

Tilting skip made of polyethylene, with forklift pockets and castors, blue, capacity 500 l, LxW 1530 x 950 mm. Practical and easy to use. Integrated lever operates the stop...

Tilting skip made of polyethylene, with forklift pockets and castors, blue, capacity 750 l, LxW 1650 x 1150 mm. Practical and easy to use. Integrated lever operates the stop...

BIG-BAG filling hopper, hopper suspended by forklift, painted yellow orange RAL 2000. Hopper suspended by forklift For changing work sites. Secured against unintentional slippage.

BIG-BAG filling hopper, hopper suspended by forklift, painted light blue RAL 5012. Hopper suspended by forklift For changing work sites. Secured against unintentional slippage.

BIG-BAG filling hopper, free standing design, painted yellow orange RAL 2000. Free standing design Prepared for permanent floor anchoring

BIG-BAG sacks, universal, for loose bulk material, pack of 10. Ideal for transporting loose bulk material such as packaging waste, stones, sand and gravel. Safety factor 5:1. With closing strings and 4 lifting loops.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...surface for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...for conventional container labelling. Due to the design of the container, labels can be easily removed. At extra cost, 1 long side (solid or mesh) with half drop gate.

...made of profiled sheet steel. Reinforced rim. Stacking corners with crane eyelets. Painted gentian blue RAL 5010 or zinc plated. The label area serves as an adhesive surface...

...Sturdy base frame with fork pockets. Secured against unintentional slipping and tipping out. Painted or hot dip galvanised in accordance with EN ISO 1461.