Silo container, mobile with push handle

Silo container, mobile with push handle, capacity 600 l, painted reseda green RAL 6011. 2 swivel and 2 fixed castors made of polyamide, wheel Ø 180 mm, 1 swivel castor with wheel stop. Overall height 220 mm. Additional push handle.

Crane eyelet, for silo container, extra cost.

Tilting container, tilts to either side, capacity 300 l, painted, yellow orange RAL 2000. Stable base frame with forklift pockets. Robust container, made of 2 mm thick sheet steel...

...with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

...steel with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

...steel with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

Tilting container, tilts to either side, capacity 600 l, painted, light blue RAL 5012. Stable base frame with forklift pockets. Robust container, made of 2 mm thick sheet steel...

Tilting container, tilts to either side, capacity 300 l, hot dip galvanised. Stable base frame with forklift pockets. Robust container, made of 2 mm thick sheet steel with reinforced...

Wheels, for tilting skip, overall height 155 mm. 2 swivel castors and 2 fixed castors made of polyamide, wheel Ø 125 mm, 1 swivel castor with wheel stop. Overall height 155 mm.

Tilting container, tilts to either side, capacity 600 l, hot dip galvanised. Stable base frame with forklift pockets. Robust container, made of 2 mm thick sheet steel with...

...with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

...with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

...with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

...with reinforced top edge. Secured against unintentional slipping and tipping over. Hot dip galvanised in accordance with EN ISO 1461 or painted.

Tilting container, tilts to either side, capacity 600 l, painted, reseda green RAL 6011. Stable base frame with forklift pockets. Robust container, made of 2 mm thick sheet...

...when the container is placed on the floor or on the edge of a container. Painted or hot dip galvanised in accordance with EN ISO 1461.

...container. Reinforced grooves in the base (centring walls) for precise emptying as standard. Opening angle of base flap 90°. The base flap closes automatically when the container...

...remains inside the container. Reinforced grooves in the base (centring walls) for precise emptying as standard. Opening angle of base flap 90°. The base flap closes automatically...

...inside the container. Reinforced grooves in the base (centring walls) for precise emptying as standard. Opening angle of base flap 90°. The base flap closes automatically...

...container. Reinforced grooves in the base (centring walls) for precise emptying as standard. Opening angle of base flap 90°. The base flap closes automatically when the container...

...and bottom with wrap-around rails. Torsion resistant due to flat steel inserts in the corners. For use with all types of bulk material. Can be transported with a forklift, pallet...

...and bottom with wrap-around rails. Torsion resistant due to flat steel inserts in the corners. For use with all types of bulk material. Can be transported with a forklift,...

Wheels, for hinged bottom skip, 2 swivel castors and 2 fixed castors. Consisting of 2 swivel castors and 2 fixed castors. Polyamide wheels, Ø 150 mm. Overall height 210 mm. Max. load per castor 350 kg.

Liquid separator, for capacity 1 m³, volume 4 l. Prevents the unnecessary contamination of the floor and environment when collecting and transporting materials which contain...

Liquid separator, for capacity 0.75 m³, volume 4 l. Prevents the unnecessary contamination of the floor and environment when collecting and transporting materials which contain...

...Tapered base with storage container, volume 4 litres. Walls and base with leak-proof welds. Liquids such as oil or excess cooling water are concentrated and collected in a drainage trap underneath the base. Fitted with a drainage screw for emptying.

...steel mesh 50 x 50 x 4 mm. One long side with half drop gate. Integrated labelling board. Base made of profiled sheet steel. Painted stone grey RAL 7030. Height when collapsed only 320 mm.

Tilting skip, low overall height, without wheels, container capacity 0.3 m³, painted light blue RAL 5012. Especially suitable for disposal of production waste from lathes,...

...saw mills and stamping machines due to low height. Tilt released by cable. Swivel back and automatic stopping by lowering and placing on floor. Safety chain. Tilting tray made...

...saw mills and stamping machines due to low height. Tilt released by cable. Swivel back and automatic stopping by lowering and placing on floor. Safety chain. Tilting tray made...

Tilting skip, low overall height, without wheels, container capacity 1.0 m³, painted light blue RAL 5012. Especially suitable for disposal of production waste from lathes, saw...

...saw mills and stamping machines due to low height. Tilt released by cable. Swivel back and automatic stopping by lowering and placing on floor. Safety chain. Tilting tray made...

Tilting skip, low overall height, without wheels, container capacity 0.3 m³, zinc plated. Especially suitable for disposal of production waste from lathes, saw mills and stamping...

Tilting skip, low overall height, without wheels, container capacity 0.5 m³, zinc plated. Especially suitable for disposal of production waste from lathes, saw mills and stamping...

Tilting skip, low overall height, without wheels, container capacity 1.0 m³, zinc plated. Especially suitable for disposal of production waste from lathes, saw mills and...

Tilting skip, low overall height, without wheels, container capacity 1.5 m³, zinc plated. Especially suitable for disposal of production waste from lathes, saw mills and...

...mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

Tilting skip, low overall height, without wheels, container capacity 0.75 m³, zinc plated. Especially suitable for disposal of production waste from lathes, saw mills and stamping...

Lid for low profile tilting skip, 2-piece, for container capacity 0.75 m³, surcharge.

Folding lid for tilting skip low profile, for container capacity 0.5 m³, zinc plated.

Lid for low profile tilting skip, 2-piece, for container capacity 0.3 m³, surcharge.

...crane. Field for labelling. Torsion free corner posts. Hollow profile feet, especially resistant to buckling. Base and side panels made of profiled 2 mm sheet metal....

Sheet steel stacking container, heavy duty model, length x width 800 x 500 mm, zinc plated, order quantity 5+. For heavy loads / stacked loads. Can be lifted with a crane....

Oil-tight welding for tilting container, for container capacity 0.3 - 0.75 m³, extra cost.

Oil-tight welding for tilting container, for container capacity 1.0 - 2.0 m³, extra cost.

Tilting skip for metal swarf, container capacity 0.75 m³, hot-dip galvanised. Sieve insert hole Ø 3 mm, spaced 6 mm apart. With 1 drainage tap. Self-tilting mechanism....

...Tilt released by cable. Swivels back and locks automatically. Safety chain. Hidden mechanics. Tilting tray made of 3 mm sheet steel with rim reinforcement. Painted light blue RAL 5012 or hot dip galvanised.

...Profiled sheet metal. Three sides with stacking rim. Stacking feet. Without crane eyelets Large opening for inspection, loading/unloading. The 3 sizes can be stacked together.

...when stacked. Welded angle iron / steel mesh construction. Mesh size 50 x 50 x 4.6 mm. Base with steel trussing and solid wooden inserts. Painted stone grey RAL 7030. Can be...

Half-collapsible longitudinal wall, for mesh containers with sheet steel bottom, for size 1000x800 mm, painted gentian blue RAL 5010, surcharge.