Sump trays made of sheet steel, painted or hot dip galvanised

Storage and transport pallet with sump tray, open on all sides, for 1 drum, painted.

Storage and transport pallet with sump tray, open on all sides, for 1 drum, zinc plated.

Storage and transport pallet with sump tray, open on all sides, for 2 drums, painted.

Storage and transport pallet with sump tray, open on all sides, for 2 drums, zinc plated.

Storage and transport pallet with sump tray, open on all sides, for 4 drums, painted.

Storage and transport pallet with sump tray, open on all sides, for 4 drums, zinc plated.

Storage and transport pallet with sump tray, with closed rear and side walls, for 1 drum, painted.

Storage and transport pallet with sump tray, with closed rear and side walls, for 1 drum, zinc plated.

Storage and transport pallet with sump tray, with closed rear and side walls, for 2 drums, painted.

Storage and transport pallet with sump tray, with closed rear and side walls, for 2 drums, zinc plated.

Sump pallet made of GRP, without connecting brackets, for placing on the ground or loosely on pallets, without grate. Suitable for Euro pallets 800 x 1200 mm. For 2 x 120 l or 6...

Sump pallet made of GRP, with connecting brackets, for Euro pallets, without grate. Suitable for Euro pallets 800 x 1200 mm. For 2 x 120 l or 6 x 60 l drums or small containers. Model...

Filling station for indoor drum storage use, for 2 drums x 200 l, max. load 760 kg. Remove and insert drums on drum pallet with a forklift. Freely accessible. Sturdy steel...

...effective solution for meeting this requirement. Applications For placement in areas where empty containers are stored or transported, where transformers are inspected and serviced,...

Edge connector for steel low profile sump tray, zinc plated, WxD 123 x 100 mm.

Loading ramps for steel low profile sump trays, zinc plated, depth 1150 mm, max. wheel load 500 kg, width 950 mm.

Kerb rail for GRP sump tray, for sump design with 2 drums, 4 pieces, each 500 mm long. Zinc plated, 4 part. For mesh grid shelves to secure small canisters.

...When transferring, handling, transporting and storing empty containers, leaks, splashes and drops must be properly contained. Low profile sump trays are a cost effective solution...

...flame red RAL 3000. Sheet steel housing painted inside and outside, yellow orange RAL 2000, or zinc plated.

Drum storage with GRP sump tray, hot dip galvanised steel parts, for 6 x 60 l and/or small containers, with 2 mesh grid shelves and drum supports.

Drum storage with GRP sump tray, hot dip galvanised steel parts, with 2 drum supports for 2 x 60 l drums.

Sump pallet made of GRP, without grid, LxWxH 850 x 850 x 390 mm. Can be set up individually or linked together to form a continuous unit. With zinc plated steel grate or with chemical resistant GRP grate.

GRP sump tray accessories, steel base for GRP sump pallet, for sump trays with 2 drums, zinc-plated.

Hazardous goods storage, for 1 x 1000 l IBC, painted light blue.

Hazardous goods storage, for 1 x 1000 l IBC, painted flame red.

Extra cost for exterior paintwork, sky blue RAL 5015, for external WxD 4075 x 2875 mm. Additional exterior paintwork in sky blue RAL 5015 at extra cost - other colours on request.

Exterior paintwork, in one RAL colour for gas cylinder container, with external HxWxD 2100 x 2100 x 3100 mm, extra cost. Available in all standard RAL colours. Special colours, etc. on request.

General purpose stainless steel container accessory, self-closing taps, brass, with large lever.

Drum funnel, diameter 650 mm, sheet steel. Sturdy, large-surface funnel for filling via the 2 inch bunghole.

Sump tray made from sheet steel, without grid, flame red RAL 3000, height 465 mm.

Sump tray made from sheet steel, without grid, flame red RAL 3000, height 360 mm.

Sump tray made from sheet steel, without grid, hot dip galvanised, height 465 mm.

Sump tray made from sheet steel, without grid, hot dip galvanised, height 285 mm.

Sump tray made from sheet steel, without grid, hot dip galvanised, height 250 mm.

Sump tray made from sheet steel, with grid, flame red RAL 3000, for 3 drums, height 285 mm.

Sump tray made from sheet steel, with grid, red RAL 3000, for 4 drums, height 250 mm.

Sump tray made from sheet steel, with grid, hot dip galvanised, for 2 drums, height 360 mm.

Sump tray made from sheet steel, with grid, hot dip galvanised, for 3 drums, height 285 mm.

Sump tray made from sheet steel, with grid, hot dip galvanised, for 4 drums, height 250 mm.

Mobile sump tray made of sheet steel, with grate, flame red RAL 3000, 200 litre drums 2 x standing, with strap. Cost effective: Wheel Ø 125 mm. Low overall height. Sump capacity...

Mobile sump tray made of sheet steel, with grate, hot dip galvanised, 1 x 200 litre standing drum, with strap. Cost effective: Wheel Ø 125 mm. Low overall height. Sump...

Hazardous goods storage, with GRP hood, LxWxH 1455 x 830 x 1450 mm, zinc plated. For storing 2 x 200 l or 6 x 60 l drums and small containers. Weather resistant, light GRP hood,...

Drum stand with support bracket, height 475 mm, length 835 mm, width 1150 mm. With support bracket for horizontal storage and filling. Height 475 mm.

Hazardous goods shelf container for outdoor storage, internal height 2 x 1250 mm, with sliding door, internal width 2 x 2700 mm, external WxDxH 5700 x 1500 x 2975 mm, flame red RAL 3000.

Drum stand with support bracket, height 475 mm, length 760 mm, width 540 mm. With support bracket for horizontal storage and filling. Height 475 mm.

Drum stand with support bracket, roll supports for drum stand, pair, for 60 litre drums. Optional, for easy rotation of the drums. 1 pair required for each drum.

Drum stand with support bracket, roll supports for drum stand, pair, for 200 litre drums. Optional, for easy rotation of the drums. 1 pair required for each drum.

Pressurised gas bottle cabinet accessories, shelf, suitable for 2 door model with a width of 1350 mm. Suitable for gas cylinder cupboards with a width of 1350 mm. Traverses full cupboard width, height adjustable.

Bolt-on corner bracket for GRP pallet sump tray, for fastening to pallet, with screws, pack of 2.

Chemical storage cupboard accessories, PE sump tray, suitable for 1-door tall cabinet. To place on existing shelves for additional protection against small leaks.