Tilting skip for bulk goods, extremely low overall height, without chassis

Tilting skip, extremely low overall height, without wheels, container capacity 0.3 m³, painted flame red RAL 3000. Robust welded construction with slip off safety chain...

Tilting skip, extremely low overall height, without wheels, container capacity 1.0 m³, painted light blue RAL 5012. Robust welded construction with slip off safety chain...

...on 100 mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

...mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

Tilting skip for shavings, low overall height, without wheels, container capacity 0.75 m³, painted light blue RAL 5012. Sieve insert hole Ø 3 mm, spaced 6 mm apart, screwed on...

...axle wheels, Ø 200 mm. Nylon wheels. With push handle. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

Stacking tilting skips, container capacity 0.3 m³, hot dip galvanised. Torsion-free sheet steel design. Smooth, 3 mm thick discharge panel. Side walls, rear wall and base...

...beam. Containers with lids (accessory) cannot be stacked. Colours Mouse grey RAL 7005, reseda green RAL 6011, gentian blue RAL 5010, flame red RAL 3000 or zinc plated to EN ISO 1461.

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...with swivel or fixed castors (at extra cost). Colours: yellow orange RAL 2000, flame red RAL 3000, gentian blue RAL 5010, reseda green RAL 6011, mouse grey RAL 7005 or hot dip galvanised to EN ISO 1461. Container with lid available on request.

...placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet truck...

Bottom chute for hinged bottom skip, for container capacity 1.5 m³, with bottom chute, extra cost. Centring panels on the bottom chute prevent spilling at the sides.

Castor set for hinged bottom skip, for container capacity 1.5 m³, 2 swivel and 2 fixed castors. Hinged bottom containers with castor set cannot be stacked.

Stacking tilting skips, container capacity 0.9 m³, hot dip galvanised. Torsion-free sheet steel design. Smooth, 3 mm thick discharge panel. Side walls, rear wall and base made...

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker beam....

...of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

Stacking tilting skips, container capacity 0.3 m³, reseda green RAL 6011. Torsion-free sheet steel design. Smooth, 3 mm thick discharge panel. Side walls, rear wall and base...

...corners with crane eyelets. Stacking container for very heavy loads. Sheet thickness 2 mm. Base and walls with heavy profiling. Reinforced rim. Precise guidance when stacking...

...with crane eyelets. Stacking container for very heavy loads. Sheet thickness 2 mm. Base and walls with heavy profiling. Reinforced rim. Precise guidance when stacking one...

Sheet steel stacking container, heavy duty model for crane lifting, length x width 1200 x 1000 mm, mouse grey RAL 7005, order quantity 1+. Particularly large stacking corners...

Stacking container made of sheet steel, with access opening, length x width 1000/800x500 mm, mouse grey RAL 7005, order quantity 1+. Torsion free sheet steel construction....

...Profiled sheet metal. Three sides with stacking rim. Stacking feet. Without crane eyelets Large opening for inspection, loading/unloading. The 3 sizes can be stacked together.

Stacking container made of sheet steel, with access opening, length x width 700/500 x 800 mm, mouse grey RAL 7005, order quantity 1+. Torsion free sheet steel construction. Profiled...

Stacking container made of sheet steel, for long goods, with 4 corner posts, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 1+. Highly versatile. Can be loaded...

...from all sides. Torsion free corner post construction. Special buckle resistant feet. The sheet steel base made of 2 mm V-profile is in an 80 mm robust U-form iron frame. Reinforced...

...from all sides. Torsion free corner post construction. Special buckle resistant feet. The sheet steel base made of 2 mm V-profile is in an 80 mm robust U-form iron frame....

...Torsion free corner post construction. Hollow profile feet, especially resistant to buckling. Base and 2 longitudinal walls made of profiled 2 mm sheet steel. Reinforced...

Stacking container made of sheet steel, for long goods, with 4 corner posts, length x width 1200 x 1000 mm, zinc plated, order quantity 1 +. Highly versatile. Can be loaded...

...Torsion free corner post construction. Hollow profile feet, especially resistant to buckling. Base and 2 longitudinal walls made of profiled 2 mm sheet steel. Reinforced rim. Stacking corners with crane loops. Can only be moved by crane with crane chains.

...made of beaded sheet steel. Mesh sides, mesh size 50 x 50 mm, wire thickness 4 mm. Gentian blue RAL 5010 or zinc plated. Available at extra cost, one long side with half drop gate (see accessories).

...made of profiled sheet steel. Reinforced rim. Stacking corners with crane eyelets. Painted gentian blue RAL 5010 or zinc plated. The label area serves as an adhesive surface...

...of beaded sheet steel. Mesh sides, mesh size 50 x 50 mm, wire thickness 4 mm. Gentian blue RAL 5010 or zinc plated. Available at extra cost, one long side with half drop gate (see accessories).

Mesh container with sheet steel bottom, LxW 800 x 600 mm, zinc plated, order quantity 1 +. Corner columns with crane eyelets. Forklift pockets. Base made of beaded sheet...

...Mesh sides, mesh size 50 x 50 mm, wire thickness 4 mm. Gentian blue RAL 5010 or zinc plated. Available at extra cost, one long side with half drop gate (see accessories).

Mesh container with sheet steel bottom, LxW 1200 x 800 mm, zinc plated, order quantity 1 +. Corner columns with crane eyelets. Forklift pockets. Base made of beaded sheet steel....

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 5 +. Robust construction. Material thickness...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, reseda green RAL 6011, order quantity 5 +. Robust construction. Material thickness...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, flame red RAL 3000, order quantity 5 +. Robust construction. Material thickness 1.5...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, gentian blue RAL 5010, order quantity 5 +. Robust construction. Material thickness 1.5...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 10 +. Robust construction. Material thickness 1.5...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, reseda green RAL 6011, order quantity 10 +. Robust construction. Material thickness...

Stacking container made of sheet steel, light duty design, length x width 1000 x 800 mm, flame red RAL 3000, order quantity 10 +. Robust construction. Material thickness 1.5...

...mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates. At extra cost, 1 long side as solid wall or as mesh half drop gate (see accessories).

...1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates. At extra cost, 1 long side as solid wall or as mesh half drop gate (see accessories).

...1.5 mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates. At extra cost, 1 long side as solid wall or as mesh half drop gate (see accessories).

Stacking container made of sheet steel, light duty design, length x width 1200 x 800 mm, gentian blue RAL 5010, order quantity 5 +. Robust construction. Material thickness...

Stacking container made of sheet steel, light duty design, length x width 1200 x 800 mm, reseda green RAL 6011, order quantity 10 +. Robust construction. Material thickness...

...mm. All-round rim reinforcement. Corner posts with crane loops and non-marking base plates. At extra cost, 1 long side as solid wall or as mesh half drop gate (see accessories).

Bottom chute for hinged bottom skip, for container capacity 0.75 m³, with bottom chute, extra cost. Centring panels on the bottom chute prevent spilling at the sides.