Tilting skips for metal swarf without castors, low overall height

...on 100 mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

...on 100 mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

...mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

...Field for labelling. Torsion free corner posts. Hollow profile feet, especially resistant to buckling. Base and side panels made of profiled 2 mm sheet metal. Reinforced rim....

...mm. Corner posts with crane eyelets and non-marking base plates. Clearance height 100 mm. Corrugated base. Front panel with welded mesh. Mesh width 50 x 50 mm, wire thickness 4 mm, and labelling board.

Mesh container with sheet steel bottom, LxW 1200 x 1000 mm, zinc plated, order quantity 1 +. Corner columns with crane eyelets. Forklift pockets. Base made of beaded sheet steel....

Stacking container made of sheet steel, light duty design, length x width 1200 x 800 mm, mouse grey RAL 7005, order quantity 5 +. Robust construction. Material thickness...

Stacking container made of sheet steel, light duty design, length x width 1200 x 800 mm, mouse grey RAL 7005, order quantity 10 +. Robust construction. Material thickness 1.5...

Stacking container made of sheet steel, with access opening, length x width 700/500 x 800 mm, zinc plated, order quantity 1 +. Torsion free sheet steel construction. Profiled...

Stacking container made of sheet steel, with access opening, length x width 1000/800x500 mm, zinc plated, order quantity 1 +. Torsion free sheet steel construction. Profiled...

...sheet metal. Three sides with stacking rim. Stacking feet. Without crane eyelets Large opening for inspection, loading/unloading. The 3 sizes can be stacked together.

...Torsion free corner post construction. Hollow profile feet, especially resistant to buckling. Base and 2 longitudinal walls made of profiled 2 mm sheet steel. Reinforced rim. Stacking corners with crane loops. Can only be moved by crane with crane chains.

...free corner post construction. Hollow profile feet, especially resistant to buckling. Base and 2 longitudinal walls made of profiled 2 mm sheet steel. Reinforced rim. Stacking corners with crane loops. Can only be moved by crane with crane chains.

Stacking container made of sheet steel, for long goods, with 2 longitudinal walls, length x width 1200x1000 mm, zinc plated, order quantity 1 +. Very robust wall design. Torsion...

...with large gusset plates. Stacking corners with crane loops. Can only be moved by crane with crane chains.

...from all sides. Torsion free corner post construction. Special buckle resistant feet. The sheet steel base made of 2 mm V-profile is in an 80 mm robust U-form iron frame....

...with large gusset plates. Stacking corners with crane loops. Can only be moved by crane with crane chains.

Tilting skip, extremely low overall height, without wheels, container capacity 0.3 m³, painted light blue RAL 5012. Robust welded construction with slip off safety chain...

Tilting skip, extremely low overall height, without wheels, container capacity 0.5 m³, painted light blue RAL 5012. Robust welded construction with slip off safety chain and...

Tilting skip, extremely low overall height, without wheels, container capacity 0.3 m³, painted flame red RAL 3000. Robust welded construction with slip off safety chain...

Tilting skip, extremely low overall height, without wheels, container capacity 1.0 m³, painted light blue RAL 5012. Robust welded construction with slip off safety chain...

...on 100 mm above the bottom of the container. With 1 drainage tap. Tilting mechanism released via cable pull. Emptied skip latches in place again when put on floor. Painted (3 colours available) or hot dip galvanised in accordance with EN ISO 1461.

Tilting skip for shavings, low overall height, without wheels, container capacity 0.5 m³, painted light blue RAL 5012. Sieve insert hole Ø 3 mm, spaced 6 mm apart, screwed on 100...

Tilting skip for shavings, low overall height, without wheels, container capacity 0.75 m³, painted light blue RAL 5012. Sieve insert hole Ø 3 mm, spaced 6 mm apart, screwed on...

Tilting skip for metal swarf, container capacity 0.75 m³, painted light blue RAL 5012. Sieve insert hole Ø 3 mm, spaced 6 mm apart. With 1 drainage tap. Self-tilting mechanism....

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...with swivel or fixed castors (at extra cost). Colours: yellow orange RAL 2000, flame red RAL 3000, gentian blue RAL 5010, reseda green RAL 6011, mouse grey RAL 7005 or hot dip galvanised to EN ISO 1461. Container with lid available on request.

...placed on the ground or on the edge of a container. Rubber buffers cushion the base flaps from slamming down when opening to unload the contents. Mobile with forklift, pallet truck...

Bottom chute for hinged bottom skip, for container capacity 1.5 m³, with bottom chute, extra cost. Centring panels on the bottom chute prevent spilling at the sides.

Castor set for hinged bottom skip, for container capacity 1.5 m³, 2 swivel and 2 fixed castors. Hinged bottom containers with castor set cannot be stacked.

...of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker beam....

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...made of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker beam....

...of profiled 2 mm sheet metal. Reinforced rim. 0.3 m³ container with 3 stacking feet, containers from 0.55 m³ with 4 stacking feet. Can be rotated on 2 pins in the stacker...

...beam. Containers with lids (accessory) cannot be stacked. Colours Mouse grey RAL 7005, reseda green RAL 6011, gentian blue RAL 5010, flame red RAL 3000 or zinc plated to EN ISO 1461.

Sheet steel stacking container, heavy duty model for crane lifting, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 1+. Particularly large stacking...

Sheet steel stacking container, heavy duty model for crane lifting, length x width 1200 x 800 mm, mouse grey RAL 7005, order quantity 1+. Particularly large stacking corners...

Sheet steel stacking container, heavy duty model for crane lifting, length x width 1200 x 1000 mm, mouse grey RAL 7005, order quantity 1+. Particularly large stacking corners...

...Profiled sheet metal. Three sides with stacking rim. Stacking feet. Without crane eyelets Large opening for inspection, loading/unloading. The 3 sizes can be stacked together.

Stacking container made of sheet steel, with access opening, length x width 1200/1000 x 800 mm, mouse grey RAL 7005, order quantity 1+. Torsion free sheet steel construction....

Stacking container made of sheet steel, with access opening, length x width 700/500 x 800 mm, mouse grey RAL 7005, order quantity 1+. Torsion free sheet steel construction. Profiled...

Stacking container made of sheet steel, for long goods, with 4 corner posts, length x width 1000 x 800 mm, mouse grey RAL 7005, order quantity 1+. Highly versatile. Can be loaded...

...from all sides. Torsion free corner post construction. Special buckle resistant feet. The sheet steel base made of 2 mm V-profile is in an 80 mm robust U-form iron frame. Reinforced...

Stacking container made of sheet steel, for long goods, with 4 corner posts, length x width 1200 x 1000 mm, mouse grey RAL 7005, order quantity 1+. Highly versatile. Can be loaded...

Stacking container made of sheet steel, for long goods, with 2 longitudinal walls, length x width 1000x800 mm, mouse grey RAL 7005, order quantity 1+. Very robust wall design....

Stacking container made of sheet steel, for long goods, with 4 corner posts, length x width 1200 x 1000 mm, zinc plated, order quantity 1 +. Highly versatile. Can be loaded...

...Torsion free corner post construction. Hollow profile feet, especially resistant to buckling. Base and 2 longitudinal walls made of profiled 2 mm sheet steel. Reinforced rim. Stacking corners with crane loops. Can only be moved by crane with crane chains.

Stacking container with runners, suitable for use in high racking, LxW 1200 x 1000 mm, order quantity 1+. Reinforcements on outside for optimum utilisation of space inside....