Wall cartridges for screw connection

Tape barrier wall unit, yellow casing, yellow/black belt. Plastic housing, including wall clip.

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, red/white powder coated, for bolting, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, yellow/black powder-coated, for bolting, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder...

...See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, zinc plated, for setting in concrete, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

...powder coated in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, red/white powder coated, for setting in concrete, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Bars for safety railing, for outdoor use, length 1350 mm. For easy installation between the various posts. In four lengths, incl. mounting materials. Cross section 140 x 80 x 3 mm.

Safety bar with knee rail, yellow/black powder-coated, for setting in concrete, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Bars for safety railing, for outdoor use, length 1000 mm. For easy installation between the various posts. In four lengths, incl. mounting materials. Cross section 140 x 80 x 3 mm.

Safety bar with knee rail, monochrome powder-coated, for concreting in, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, monochrome powder-coated, for setting in concrete, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Bars for safety railing, for outdoor use, length 1500 mm. For easy installation between the various posts. In four lengths, incl. mounting materials. Cross section 140 x 80 x 3 mm.

Safety bar with knee rail, zinc plated, for concreting in, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, yellow/black powder-coated, for bolt on fastening, width 1500 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

Safety bar with knee rail, red/white powder coated, for concreting in, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder...

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, zinc plated, for bolting, width 2000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated in colour....

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Safety bar with knee rail, yellow/black powder-coated, for bolting, width 1000 mm. Height above floor 1000 mm. Steel pipe, Ø 42.4 mm, hot dip galvanised or additionally powder coated...

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

...in colour. See colour scale or table for colour selection. With base plate 150 x 150 mm for for wall-plug connection or for setting in concrete (height below floor 200 mm).

Security/safety mirror for indoor and outdoor use, rectangular type, LxW 800 x 600 mm. Incl. bracket for mounting on walls and posts with Ø 50 - 80 mm.

Security/safety mirror for indoor and outdoor use, rectangular type, LxW 1000 x 800 mm. Incl. bracket for mounting on walls and posts with Ø 50 - 80 mm.

Colour marking device with variable line width, marking system set, set white. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Colour marking device with variable line width, marking system set, set yellow. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Floor marking tape made of vinyl, width 50 mm, orange. For temporary marking. Not suitable for frequent forklift traffic. Optimum laying temperature +10 °C. Roll length 33 m.

Marking paint, pack of 1 tin, yellow. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

...which are no longer required. 600 ml spray can for approx. 20 - 100 m, depending on the nature of the floor, the width of the line and marking speed. Pack of 6 spray cans (one colour) For occasional use. Pack of 12 spray cans (one colour) The large economy pack.

Marking paint, contents 600 ml, pack of 12 cans, traffic grey RAL 7042. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, contents 600 ml, pack of 6 cans, traffic grey RAL 7042. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings which...

Marking paint, pack of 6 tins, white. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, signal yellow RAL 1003. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, pack of 1 tin, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking device, variable line width, line width 50-75 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

Marking device, variable line width, line width 100-130 mm. Line marking system set: Consists of marking equipment for line widths of 50 - 75 mm, two cans of paint, snap line and chalk.

...to ensure a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet steel, inside in gentian blue RAL 5010, exterior painted with...

...locks, 2 keys per lock. Rubber seals are bonded to the corners to ensure a tight seal and to prevent them from slipping out of the corners. Rear panel made of zinc plated sheet...

...pane made of 4 mm acrylic glass. Door folds down 180° for the easy insertion of documents. Door does not protrude outward and thus does not obstruct access. Common key cylinder...

...between hinges and thus prevents door from getting stuck when closed. Common key cylinder locks, 2 keys per lock. Rubber seals are bonded to the corners to ensure a tight seal and...

Marking paint, pack of 6 tins, blue. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, pack of 1 tin, grey. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

Marking paint, contents 600 ml, pack of 6 cans, traffic green RAL 6024. Optimised spray nozzle for better line quality. The grey and black colour is used to cover markings...

Marking paint, pack of 6 tins, green. Dries in around 20 minutes depending on the weather and the quality of the surface. One tin (750 ml) covers 75 - 100 m at a paint width of 50 mm. Grey and black are used to cover up old markings.

...plated sheet metal. Robust stand pipe for setting in concrete, hot dip galvanised and additionally powder coated in silver colour.

Waste collector with arched tubular stand, for 70 litre plastic sacks, with ashtray insert, hot dip galvanised. Top part with rain protection hood and body made of zinc plated...

...sheet steel, optionally additionally powder coated. Tubular arch and base plate are hot dip galvanised on all models. Top part is locked to body with two square locks. Top part serves as a clamping mechanism for 60 and 70 litre plastic waste sacks.