Mobile used oil collection and extraction unit – PRESSOL capacity 75 l, drained using compressed air

Mobile used oil collection and extraction unit with glass measuring cylinder, container capacity 75 litres.

Height adjustable oil collection funnel with removable sieve and additional coarse screen, as well as a manometer/vacuum meter for pressure and vacuum display on the 7 litre glass measuring cylinder.

Container made from 1.5 mm sheet steel. Metal apron to prevent damage.
2 fixed wheels, 2 steering wheels, robust push handle for ideal handling.
Height adjustable oil collection funnel with removable sieve and additional coarse screen.
Glass measuring cylinder, capacity 7 litres.
Transparent discharge hose, 2 m, with steel outlet manifold and ball cock.
Suction hose, 2 m, with coil spring.

Compressed air is used to build up a vacuum in the container using the Venturi block.
Manometer/vacuum meter for the pressure and vacuum display.
Oil is extracted using the dipstick opening.
Fill level indicator.
Safety pressure relief valve set to 0.5 bar (cannot be changed), with flow control valve.
Plug nipple for Rectus coupling, type 26, NW 7.2 mm, ball cock.
Suction probe set Ø 5/6/8 mm with adapter for BMW, Mercedes, VW, Audi and Smart. Probe holder.
Pressurised drainage.

Painted with oil resistant hydro-structure paint:
Container in window grey, silk matt, RAL 7040 / collection funnel blue, Pantone 294 (similar to RAL 5005).

Media:
Suitable for used oils of known origin with a flash point above 55 °C or non flammable liquids.
May not be used for flammable liquids!

Please note:
The units are compliant with test group 1 (max. pressurisation e.g. when draining filled containers +0.5 bar) in accordance with the Pressure Equipment Directive.
If the used oil collection units are drained into an oil collection tank using a hose, overflow protection must be fitted in accordance with the German Water Management Act (WHG).
Regional regulations and state guidelines must be observed.