(Multiple selections possible)
Limit Ex. VAT
If the description of a product uses the word ''technology'', then you should take a closer look. After all, when a specific technology is used, then this usually occurs due to regulations or scientific principles. This is also the case when it comes to hose technology. While you might go to a hardware store and buy a basic water hose to water your garden plants with, when it comes to the food industry, hazardous materials handling and medical technology, it is essential to know exactly which hose is needed for the respective purpose of use. Solid, liquid and gaseous substances are normally conveyed from A to B by means of technical hoses. As a reliable means of conveyance, hoses can supplement a system of pipes, which are far more laborious to install, for use in industry and commercial use.
When you decide on a hose, you should know exactly which conditions the hose will be used under:
The bending radius is calculated on the basis of a range of criteria:
If a hose is bent so far that it buckles, the smallest potential bending radius has been exceeded. The smaller the required bending radius is, the greater the risk is that the hose will break. You can calculate the bending radius. Use the following method: inner hose diameter x 10 = maximum bending radius in a pressureless state.
In this category you can find hose technology for compressed air, water and drinking water, as well as for chemicals.
Most technical hoses are made of PVC or PU, and are available as transparent or as yellow hoses, ensuring that they are clearly visible and do not present a tripping hazard. Hoses for compressed air are also made of PVC and are particularly pliant and flexible.
Our multifunction hoses are made of PVC, and can be used in a range of areas. They are available in signal yellow featuring high chemical resistance, or as transparent hoses, and are odourless and low in harmful substances.
Hose technology made of PVC is suitable for the conveyance of compressed air and water, as well as chemicals, and can be used as a protective conduit for electrical cable systems. PVC is a hard thermoplastic. This material is indispensable for many tasks performed in industry, because it is resistant to oils, greases and many chemicals. Since plasticizers can be added to hard plastics, hose technology made of PVC is available in a range of different hardness grades.
Hose technology made of PU can do everything that PVC can also do. It therefore often provides a replacement for the material PVC. Compared to PVC, PU is more resistant, more durable and more flexible. The plasticizers that are often incorporated in PVC are not added to PU, so that no harmful substances are released in the event of a fire. But this isn't actually a cause for concern: PU features a low inflammability anyway, and exhibits high temperature resistance. Industry and trades have long since discovered the advantages of PU, and are happy to put this sustainable material to good use.
Hose technology is very durable. Nevertheless, it is important to observe a few rules when using hoses:
If you observe these rules, then you'll maintain your hose technology in a perfectly reliable condition. Please do not hesitate to contact us if you have any questions about the product range.
|Hotline: 0800 0234 425 (Monday to Thursday 8 am to 5.30 pm, Friday 8 am to 5 pm)||Webcode: 0WEB|
| Zodiac 5 - Boundary Way | Hemel Hempstead HP2 7SJ | Telephone 01442 238 000 | Telefax 01442 255 002 | E-Mail: email@example.com
Managing Director: Andrew J. Henman, Jason A. Land | Register number 01178566 | VAT number: GB198538504
Join today and get 5% discount voucher! Your data will not be shared with third parties. Unsubscribe at any time.
Monday to Thursday 8.00am to 5.30pm and Friday 8.00am to 5.00pm
0800 1615 616 - Webcode 0WEB
Or write to us!
Order our catalogue
You can order our current catalogue here.