Ref.: 754818 49

Electric tank container pump – Lutz for alkaline solutions, set

Electric tank container pump – Lutz

pump set

Ref.: 754818 49
Product description
  • For alkaline solutions
  • Ergonomically designed motor housing with an on/off switch that is easy to operate
  • Pump sets are pre-assembled and quickly ready for operation
  • Pump unit constructed without seals for operation even if the pump runs dry temporarily
  • Suitable pumps for all types of liquids
For low viscosity alkalis, sodium hydroxide, potassium hydroxide, ammonia, formic acid, acetic acid etc.
Description of pump set
PP pump, with a 2.0 m PVC reinforced hose DN 19, PP pump pistol, PP drum adapter.
Delivered partially assembled – easy final assembly.
For corrosive media or unspecified media, please enquire about compatibility beforehand.
The max. pump rate is a value determined by means of a test bench, measured with water as the medium at a temperature of approx. 20 °C. The measurement is made at the outlet port of the pump, without a hose, nozzle or flow meter. The pump rate that can be attained in use is lower, and depends on the individual job, the properties of the pumped medium and the configuration of the pump. The max. pumping height also depends on the pump design, motor and medium. The viscosity values are determined using oil.
Technical data
Design of pumpfor liquid storage container
For mediaalkalis
For liquidslow-viscosity alkalis, sodium hydroxide, potassium hydroxide, ammonia, formic acid, acetic acid, etc.
Material of pumppolypropylene (PP)
Drive shaft materialNiRo (stainless steel)
Immersion depth1200 mm
Pump rate85 l/min
Pumping height19 m wc
Scope of deliveryPP pump, with a 2.0 m PVC reinforced hose DN 19, PP pump pistol, PP drum adapter
Power500 watt
Weight5.31 kg
Product typetank container pumps, electric
Suppliedassembled
Instructions
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.
‌
‌
‌
‌
‌