Ref.: 691117 49

Pneumatic grease gun – PRESSOL for greases up to NLGI 2 at 20 °C

Pneumatic grease gun – PRESSOL

LxWxH 402 x 171 x 84 mm

£94.00
Price / item (Excl. VAT)
Delivery time: 4 Week delivery
Product description
  • The device operates using greases up to NLGI 2 at 20 °C
  • Quick venting by rotating the grease gun tube half a turn
  • Safe handle on the push rod
  • Performance unchanged after 40000 working cycles
Specification:
– Grease gun connection on pressure side M10x1, filling nipple M10x1
– Fill capacity 500 cm³
– Filling options are a 400 g grease cartridge, grease filler or bulk grease, transformation ratio 50:1, grease pumped into the head of the grease gun by spring force
– Diameter of grease pump piston 6 mm
– Grease pump piston operated by single stroke grease delivery
– Delivery volume/stroke 0.8 cm³
– Recommended air pressure 6 bar, minimum air pressure 2 bar, maximum air pressure 8 bar
– Push bar operated using L-handle, cover enclosed loose
– Filling nipple M10x1 a, nozzle pipe with bend M10x1, 150 mm and mouthpiece 4 BA, M10x1

Loose cover with clamp allows manual support for the spring force in any position for compression of bulk grease or for pressing the cuff into damaged cartridges.

Contoured cuff with tight fit for bulk grease or cartridge.
Pump piston with high precision fit on the cylinder (no fake lubrication).
Technical data
For mediagreases up to NLGI 2 at 20 °C
Method of operationmanual
Fill capacity0.5 l
Filling options400 g grease cartridge, DIN 1284, grease filler or bulk grease by means of spatula
Burst pressure850 bar
Length402 mm
Width171 mm
Height84 mm
Finishmetal
Grease cartridge diameter52 mm
Product typepneumatic grease guns
Suppliedassembled
Weight1.84 kg
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.
‌
‌
‌
‌