Complete modular system set 4 – RAU for workbench

The complete modular system set 4 includes:
– 1 x fastening set (cross bar) with 2 system uprights
– 1 x perforated panel (WxH: bay width – 85 mm x 650 mm) with square system perforation to integrate tool holders and accessories
– 1 x shelf (WxD: bay width x 300 mm), melamine coated panel
– 1 x suspension rail to hold open fronted storage bins (open suspension edge at the rear of the open fronted storage bins required) and/or power strip
– 1 x pair of stabilisers, HxD 300 x 550 mm, to hold guide track/mounting rail (max. 2)
– 2 x guide track/mounting rail to hold lighting strip and/or carriage with safety hook
– 1 x carriage with safety hook for spring balancer etc.
– 1 x workplace lamp (width 590 mm for bay width 750 – 1000 mm, or width 1190 mm for bay widths 1250 – 2000 mm), strip light with on/off switch, connection cable with plug, electronic ballast (EB), ingress protection IP20, output 25 W

Each component of the set is included twice or four times with the 2500 and 3000 mm workbench widths.

The installation height of the add-on units can be adapted on the system supports. The fastening set (cross bar) is attached to the rear of the system frame under the worktop. The system uprights (aluminium profile 40 x 40 mm) are screwed to the fastening set (cross bar) by means of slot nuts (height adjustable) and run upwards behind the worktop so that the entire depth of the worktop remains free (not bolted to the worktop). The system uprights feature a profile groove on all 4 sides to allow use from all sides.