RIGA bench – PROCITY overall length 1800 mm

The PROCITY RIGA bench made of recycled plastic combines a clear, straightforward design with a construction made of steel and plastic. It is designed as seating for public and commercial outdoor areas and is suitable, for example, for parks, squares, green spaces and outdoor recreational areas. Depending on the model, the bench is available with or without a backrest.

The base frame consists of hot dip galvanised and powder coated steel. The load-bearing steel elements are 80 mm wide and 8 mm thick. Two feet form the substructure of the bench and connect the seat to the frame. The charcoal model of the steel creates a contrast to the brown plastic slats.

The seat consists of 40 mm thick slats made of recycled plastic. Internal reinforcements made of hot dip galvanised steel supplement the construction of the plastic slats. On models with a backrest, the seat is complemented by a correspondingly designed back section. The different models allow the selection of a bench with or without back support.

The bench has a width of 1800 mm and thus offers continuous seating for several people. Depending on the model, the overall height and the design of the backrest vary. The version without a backrest has a seat height of 446 mm.

Assembly is carried out via base plates, with which the bench can be fastened at the intended installation site. The RIGA bench is delivered disassembled and assembled on site. The combination of a galvanised steel frame, reinforced recycled plastic slats and different backrest models provides a functional seating solution for outdoor use.