Ref.: 562665 49

HSS TiN stepped drill set – KS Tools sheet steel case

HSS TiN stepped drill set – KS Tools

3 parts, 4 – 30 mm

£235.00
Price / item (Excl. VAT)
Delivery time: 2 Week delivery
Product description
  • High strength hinge
  • Tip in accordance with DIN 1412 C
  • Split point as tip
  • Right hand cut, spiral grooves
  • 118° point angle, 90° step angle
  • Silent operation, high cutting performance
  • High performance steel, with TiN coated surface
The cone simplifies retraction from sheets that have been drilled through. Higher feed rates possible in non-ferrous metals in particular due to low cut pressure.
Technical data
FinishTiN
Colourgold
Conforms toDIN 1412 C
Number of parts3 pcs.
Min. drill range4 mm
Max. drill range30 mm
Cutting materialHSSE-TiN
Product typestepped hole cutters
Suppliedassembled
Weight0.61 kg
Sustainability
Product with potential for future improvement

This product does not yet meet enough of our sustainability criteria. This does not mean that it has no sustainable properties – however, the total score is lower than 3 points. Therefore, it is not (yet) labelled as particularly sustainable. Our sustainability assessment is based on transparent, clearly defined ecological, social and economic criteria. The aim is to highlight development potential and create greater transparency.

You can find out more about product evaluation and our sustainability initiative on our information page.
‌
‌
‌