Wall clip – Skipper for tape barrier

Wall clip as a practical accessory for Skipper belt barriers

The wall clip enables direct attachment of a Skipper belt end to the wall – quickly, space-savingly and without an additional Skipper unit. This allows fixed barriers to be set up with minimal effort.

As a functional accessory, the clip complements existing belt barriers wherever the belt needs to be held permanently at a fixed end point. The end of the Skipper belt can be effortlessly inserted into the receiver clip. A separate unit or an additional barrier post is not required on the opposite side. This saves space and reduces the number of components required.

Quick installation makes the wall clip particularly practical for regularly used cordoned-off areas. Once the clip is mounted in the intended position, the belt can simply be hooked in when required. This creates clear boundaries without unnecessarily narrowing walkways or traffic routes with additional posts. When opening and re-closing the belt barrier, the accessory also impresses with its uncomplicated handling.

In warehouses, production and logistics, the wall clip supports the safe organisation of operational processes. It is suitable, for example, for cordoning off gates, passageways, machinery areas, loading zones or temporarily inaccessible areas. The barrier belt is provided with a defined attachment point and reliably remains in the intended position.

The compact receiver clip is a practical solution for stationary barriers along walls. Especially in narrow aisles and heavily frequented work areas, the accessory helps make efficient use of available space and avoid trip hazards caused by additional post elements.