Hammer drill bit set 4S-SDS-PLUS with 4 HM cutting edges, PGM certified

The drill bits in the 7-piece 4S-SDSplus hammer drill bit set are each equipped with 4 carbide cutting edges that guide the drill bit optimally in the borehole. Thanks to the four cutting edges, the drill bits can also be used for drilling in reinforced concrete, as the risk of snagging when hitting reinforcement bars is significantly reduced. In addition, this allows for smoother drilling.

The SDS-Plus shank is suitable for light to medium-duty drilling and chiselling work.

The Vario flute ensures that there is less frictional resistance in the front area of the borehole. Thanks to its high stability, the machine's impact energy is efficiently transferred to the drill tip, ensuring both fast drilling progress and rapid removal of drilling dust. The design reduces vibrations and promotes smooth operation, which makes handling easier and is gentle on the machine.

The PGM certification ensures that drilled holes are precise enough for the secure anchoring of dowels.

Drill bit set consisting of:
5.0 mm, 6.0 mm, 8.0 mm x 110.0 mm
6.0 mm, 8.0 mm, 10.0 mm, 12.0 mm x 160.0 mm