PRESSOL – Manual drum pump pump rate 18 l/min
- Two-part suction pipe, can be individually cut to length
- For windscreen washer fluid, acids, alkaline solutions and water-based chemicals
- Stainless steel piston rod, with drainage elbow


Ref.: 561408 49
PRESSOL – Manual drum pump, pump rate 18 l/min, for acids, alkalis, chemicals
Bulk discount of up to 9.74%
Quantity | Price/Pack | You save |
---|---|---|
1 | £77.00 | - |
3 | £74.50 | 3.25 % |
5 | £69.50 | 9.74 % |
Quantity discount from 3
Price / items (net)
£77.00
Product description
Manual drum pump to 60/200/220 litre containers.
With drainage elbow (plastic outlet manifold, attached with coupling ring).
Pump rate: 18 l/min or 0.3 l/stroke.
Suction pipe length 350 – 900 mm (can be individually cut to length).
Suitable for almost all low viscosity media.
In particular windscreen washer fluid, acids, alkaline solutions and water-based chemicals.
Materials for the parts in contact with media:
Piston rod: stainless steel (Inox)
Suction tube: PP
Pump housing: PP
Seals: PE and FKM
Drum screw connection: G 1 1/2'' and G 2''
Please note: for corrosive media or if media compatibility is unclear, please enquire about the suitability of pumps beforehand.
With drainage elbow (plastic outlet manifold, attached with coupling ring).
Pump rate: 18 l/min or 0.3 l/stroke.
Suction pipe length 350 – 900 mm (can be individually cut to length).
Suitable for almost all low viscosity media.
In particular windscreen washer fluid, acids, alkaline solutions and water-based chemicals.
Materials for the parts in contact with media:
Piston rod: stainless steel (Inox)
Suction tube: PP
Pump housing: PP
Seals: PE and FKM
Drum screw connection: G 1 1/2'' and G 2''
Please note: for corrosive media or if media compatibility is unclear, please enquire about the suitability of pumps beforehand.
- Two-part suction pipe, can be individually cut to length
- For windscreen washer fluid, acids, alkaline solutions and water-based chemicals
- Stainless steel piston rod, with drainage elbow
Technical data
Design of pump | hand pump with immersion tube |
---|---|
For media | low viscosity media |
Material of pump | PP |
Drive shaft material | INOX |
Pump rate | 18 l/min |
Immersion tube length | 350 – 390 mm |
Thread | G 1 1/2 , 2 inch |
Weight | 0.92 kg |
Supplied | partially assembled |

Customers who purchased this item also purchased
Product guide
Together we are strong: Helpful information about this product.