(Multiple selections possible)
In many areas, going by the rule of thumb is adequate. But in a professional operation with numerous sources of danger and safety requirements, this is not acceptable. Here you need precise answers to questions such as ''Is electricity flowing here?'' or ''Is the temperature correct?''. You can get answers to these questions with measuring devices from KAISER+KRAFT.
If you don't wish to rely on feeling alone and need to precisely determine ''invisible'' factors, then measuring devices are the only solution. This is the case particularly with potentially hazardous measurements such as for electricity, gas releases and temperature changes.
The measuring devices in our range that you should consider mainly depend on your industry and everyday company operations:
All measuring devices operate on the same principle: an analogue measurement sensor records the object being measured based on its physical characteristics. A lux meter for determining the brightness of a light source uses a light sensitive diode. The modern thermometer consists of a conductive sensor whose electrical conductivity changes when the temperature changes.
The information measured is converted digitally and output in various display formats.
Measuring devices usually show the result in figures on an LCD or LED display. This has the advantage in that you can directly read, document and compare the actual status. In some cases and with some special measuring devices, the absolute value alone is not sufficient. In particular with devices that should flag up a hazard, acoustic signals are the optimum addition or alternative.
This applies to voltage testers, for example, that show clearly whether the electricity has really been switched off, or to gas detectors that quickly report incidents so that you can take countermeasures rapidly.
If you wish to understand the course of a measurement or you're trying to find the best position for fixing an object on the wall, then scales, traffic light indicators or min-max values are useful, such as can be found on many multimeters, for example.
Measuring devices are there to minimise risks. You use an electrical socket tester, for example, to test your power strips instead of just hoping that they are working properly. Many measuring devices also offer you the benefit of contactless sensors so that you're not even putting yourself in any risk whatsoever.
Ultimately, what mainly counts are the conclusions you draw from the measurement result. The risk doesn't arise from the use.
Modern measuring devices have a small deviation rate – this is only true, however, if they are in good condition and properly calibrated. Imprecise results are usually due to impacts, components being moved or a maximum value being exceeded.
We would be pleased to assist you personally in any other questions regarding measuring devices from KAISER+KRAFT.
These products may also be of interest to you:
Double ladders | Ceiling fans | Hand pallet trucks | Tiles | Tool holders | Tray trolleys | HSM baling presses | EUROKRAFT workbenches
|Hotline: 0800 0234 425 (Monday to Thursday 8 am to 5.30 pm, Friday 8 am to 5 pm)||Webcode: 0WEB|
| Zodiac 5 - Boundary Way | Hemel Hempstead HP2 7SJ | Telephone 01442 238 000 | Telefax 01442 255 002 | E-Mail: firstname.lastname@example.org
Managing Director: Andrew J. Henman, Jason A. Land | Register number 01178566 | VAT number: GB198538504
Join today and get 5% discount voucher! Your data will not be shared with third parties. Unsubscribe at any time.
0800 1615 616 - Webcode 0WEB
Or write to us!
Order our catalogue
You can order our current catalogue here.